Relevance:
A water cooler is a handy device for any office, educational institution or public place. This design simplifies the process of spilling water and allows you to drink without effort. But the cooler acts not only as a dispenser. Often, such devices are equipped with mechanisms for heating or cooling the liquid.
In order to buy a quality item, it is important to familiarize yourself with all the positive aspects of the device. It will be helpful to know if there is an option to install a cup holder or turn off heating and cooling. Thus, you can define useful functions for yourself and not overpay for unnecessary functions.
We've compiled a list of the best water coolers based on expert opinions and real customer reviews. Our recommendations will help you make the best choice for your requirements and desires. There are many competitors on the world market for equipment, but we have selected the best manufacturers and recommend that you pay special attention to them:
- Aqua work
- HotFrost
- VATTEN
Categories
Floor
For home
Bottom loading
Tabletop
Cooling mode
Heating mode
| 1 | Aqua Work 16-LD / EN | 6 700 RUB |
| 2 | Aqua Work 36-TDN | 4,000 RUB |
| 3 | HotFrost 35AN | 20,900 RUB |
| 4 | HotFrost 45A | 20,900 RUB |
| 5 | HotFrost D95F | 3 300 RUB |
| 6 | Aqua Work 0.7-TD | 3 400 RUB |
| 7 | HotFrost D1150R | 1 600 RUB |
* Prices are valid at the time of publication and are subject to change
without prior notice.
Floor
Heating mode
/
Cooling mode
/
Floor
/
Bottom loading
The main advantages
- There are three indicator lights on the front panel. The first LED signals the supply of cold water, the second - the heating of the liquid. The latter signals the state of readiness of the device for operation
- The drip tray has no latches and can be removed with one hand movement. If necessary, the grate can be dismantled and drained. The whole procedure takes less than a minute
- On the right side of the cooler there are mounting bolts for the cup holder. Since the walls of the case are made of metal, you can use a holder with magnetic fasteners
- On the back there are two toggle switches that allow you to turn off heating or cooling water
- If necessary, you can completely drain the water, both from the cold and from the hot system
Heating mode
/
Cooling mode
/
Floor
More details
about
HotFrost 35AN (water cooler)
The main advantages
- The cooler has a bottom loading, which greatly simplifies the installation of the water tank. A heavy bottle can be simply moved to a special place where the pump is located
- The body has a built-in light for glasses, which helps in low light conditions. If necessary, the light can be forcibly turned off
- A fairly quiet engine is installed on the pump, which does not distract during work or rest. The reservoir is replenished automatically
- The hot water button is equipped with additional protection, which is very useful when there are children nearby
- Water supply is carried out from one tap, which simplifies the process of pouring water, and improves the aesthetic appearance
Show all products in the category "Floor"
For home
Heating mode
/
Cooling mode
/
Tabletop
/
For home
The main advantages
- Water supply is carried out by pressing a cup or mug on the tap handle. The design allows you to open water effortlessly in a few seconds using just one hand. If you lift the handle of the tap towards you, the water will flow continuously
- Despite its small dimensions, the cooler is designed for standard volumes of water. Can accommodate up to 19 L bottle
- Installed 700 W water heater. This filling quickly heats the water to an operating temperature of 90 ° C.
- The case is made of durable plastic, which will protect the cooler from mechanical damage
- Electronic cooling is used, which will cool the water 8 - 10 ° C below room temperature
For home
/
Tabletop
/
Heating mode
The main advantages
- The dispenser is used to dispense boiling water and water at room temperature. The absence of a cooling element makes the device completely silent
- The dispenser body is made of durable plastic, which perfectly withstands the stress of large bottles, as well as withstands light impacts
- For pouring water, very convenient taps are used that open by pressing the glass
- The drip tray is easy to remove and clean, which allows you to achieve good hygienic conditions for the device
- Small size and weight allow you to place the dispenser in the smallest room, and if necessary, it can be easily carried from place to place
For home
/
Tabletop
/
Heating mode
/
Cooling mode
The main advantages
- A sufficiently powerful heater is capable of producing more than seven liters per hour of water with a temperature of up to 96 degrees, which is quite enough for installation in a room with not very high traffic
- The cooling element works on the Peltier effect and cools water 14 degrees below ambient temperature up to five glasses per hour
- The cooler is universal, different bottles are suitable for work - for 23, 19 and 12 liters
- Convenient push-taps used for water supply eliminate the risk of scalding or splashing water
- Due to its small size, the cooler can be placed on almost any table, it does not need any additional devices
For home
/
Tabletop
The main advantages
- The drinking water dispenser is ideal for placement in places where there are problems with the availability of the electrical network, since it does not need electricity
- The storage tank is made of stainless steel, which has a positive effect on water quality and prolongs the life of the device compared to dispensers with plastic tanks
- The device is an excellent solution for temporary accommodation - a picnic or a campground
- Rubber-based feet prevent the device from sliding on any surface
- Light weight, a little more than one and a half kilograms, as well as miniature dimensions allow you to take the dispenser with you on various trips
Show all products in the category "Home"
Bottom loading
Heating mode
/
Cooling mode
/
Floor
/
Bottom loading
The main advantages
- In addition to hot or cold liquid, there is a button for pouring water without heating (room temperature)
- The device is equipped with a compressor type of cooling, which allows you to quickly cool warm water. Cooling rate - 2 l / h
- The bottle is installed in the base of the cooler body, which greatly saves free space. This solution improves the appearance of the device.
- The cold and hot water tanks are made of high quality stainless steel, which does not require any special maintenance. The material easily withstands the negative effects of temperature changes
- For splashes or water spilled past a glass, a special removable drip tray is made
Show all products in the category "Bottom-loading"
