Relevance:
Every builder has repeatedly encountered curved walls, floors or ceilings during repairs. The standard of modern construction requires the achievement of perfectly aligned surfaces. The correct choice of the level is able to solve any problem that may arise during operation.
At the same time, you should not look only at the great functionality. It is important to determine the goals for which the level is acquired. If you use a level only from time to time - it is simply not cost-effective to purchase an expensive device. Conversely, for large volumes and complex geometry, it is important to choose a tool that supports all the necessary functions.
We have compiled a list of the best laser levels based on expert opinions and feedback from real customers. Our recommendations will help you make the best choice for your requirements and desires. There are many competitors on the world market for equipment, but we have selected the best manufacturers and recommend that you pay special attention to them:
Budget / Inexpensive
- SANTOOL
- ADA
- Matrix
- INSTRUMAX
- ELITECH
Middle price category
- Bosch
- PRACTICE
Dear / Premium
- Makita
- INSTRUMAX
- Bosch
Categories
360 degrees
For construction
Self-leveling
Type: linear
Type: rotary
Range: up to 20 m
Range: from 20 m
| 1 | PRACTICE NL-360 (649-431) | 7,187 p. |
| 2 | ELITECH LN 10 | 6 700 RUB |
| 3 | ELITECH LN 360/1 | 6 960 RUB |
| 4 | BOSCH GLL 3-80 Professional (0601063S00) | 19 450 RUB |
| 5 | BOSCH UniversalLevel 2 Set (0603663801) | 4 356 p. |
| 6 | ELITECH LN 5 / 2V | 3 401 p. |
* Prices are valid at the time of publication and are subject to change
without prior notice.
360 degrees
Self-leveling
/
Range: up to 20 m
/
Type: linear
/
For construction
/
360 degrees
The main advantages
- During use, the level is able to create a grid of two horizontal and one vertical lines. This allows for more complex layouts compared to models that project a cross or line.
- The tool is equipped with a self-leveling function that compensates for tilt angles up to 4 degrees. If the deviation from the plane is greater, the level emits a light signal
- A special switch allows you to turn off the self-leveling of the device, which makes it possible to mark out at different angles of inclination
- Three modes of operation (with one, two or three lines) allow you to customize the tool for current tasks and prevent unnecessary battery discharge
- The battery life reaches 15 hours, which is quite enough for a full working day
360 degrees
/
Range: from 20 m
/
For construction
/
Self-leveling
/
Type: linear
More details
about
BOSCH GLL 3-80 Professional (0601063S00) (level)
The main advantages
- The compact and robust body of the level is reliably protected (IP 54) from dust and moisture, which allows using the model in the most adverse operating conditions
- Simple, reliable and practical device can simultaneously perform leveling work in the vertical and horizontal planes with high accuracy up to ± 0.2 mm / m
- Due to the use of powerful diodes, the level has strong visibility, so a clear bright line is visible at 360 degrees, the device does not need to be moved repeatedly during work
- There are several options for constructing planes, which can be selected by simply switching operating modes: only vertical, only horizontal, two vertical, one horizontal and two vertical planes
- In order to increase ease of use, the device can be mounted on a tripod or universal mount using the two threaded connections provided for this purpose.
Show all products in the category "360 degrees"
Type: rotary
Self-leveling
/
Range: from 20 m
/
Type: rotary
/
For construction
/
360 degrees
More details
about
ELITECH LN 360/1 (level)
The main advantages
- The maximum range of accurate marking when using the receiver is 80 m.This ensures the use of the level for work in large halls
- The device projects two lines forming a cross. The scanning angle of the horizontal laser covers 360˚, which allows marking the entire perimeter of the room without changing the position of the instrument
- The built-in function of automatic shutdown of lasers after exceeding the self-leveling angle guarantees protection against poor-quality measurements
- Self-leveling time is 3 seconds. This is less than most similar models
- The margin of error is only 0.2 mm, which is much less than the competition
Show all products in the category "Type: rotary"
Range: up to 20 m
Range: up to 20 m
/
For construction
/
Self-leveling
/
Type: linear
More details
about
BOSCH UniversalLevel 2 Set (0603663801) (level)
The main advantages
- Level with high quality bright laser diodes, which provide excellent line visibility in the working range of 10 m
- The device automatically adjusts its position relative to the horizon in automatic mode with a minimum error along the vertical axis ± 4 degrees in just four seconds
- The presence of the indicator of correct installation (self-leveling) reduces the time for preparation for work and increases the accuracy of marking
- Large 120 degree sweep angle ensures maximum surface line length, even at close range
- Provides 1/4 '' threaded socket for attaching the level to a tripod or other suitable support
Range: up to 20 m
/
For construction
/
Self-leveling
/
Type: linear
More details
about
ELITECH LN 5 / 2V (level)
The main advantages
- Laser level with the ability to project one horizontal and two vertical lines at an angle of 90 degrees. Depending on the problem being solved, you can change the operating mode by one / two vertical lines
- The device automatically adjusts to the operating position relative to the horizontal plane with a minimum deviation of three degrees from the vertical and a very small error of ± 0.2 mm / m
- If self-leveling is impossible (deviation from the vertical more than three degrees), the warning system is activated, signaling that there is no horizontal adjustment, a sound signal is given and the laser lines blinking. The alarm system can be disabled to project slanted lines
- In order to provide additional control of the presetting, the device is equipped with a bubble level, which allows you to visually determine the correct position of the level
- For easy storage and transportation, the product includes a convenient case with a shoulder strap, and for better visualization of laser lines in bright light, the device is equipped with laser glasses
Show all products in the category "Range: up to 20 m"
Range: from 20 m
Self-leveling
/
Range: from 20 m
/
Type: linear
/
For construction
The main advantages
- The level has a shock-resistant shock-absorbing body that protects the tool from mechanical stress on the construction site.
- The operating error is 0.2 mm / m. This guarantees high accuracy of line marking
- Only one button is used to adjust the level. Thanks to such simplicity, even an inexperienced user will understand the control of the device.
- The tool kit includes a universal bracket with two threaded holes for a tripod, three holes for fastening with screws or nails, two powerful magnets and anti-slip rubber feet
- Has good range without using a receiver
Show all products in the category "Range: from 20 m"
