Best rating well pumps

This relatively inexpensive pump is ideal for wells with a decent sand content - up to 100 g / m3. He has a good performance - 4.8 cubic meters per hour, this is enough for a confident water supply at home with 2-3 points of analysis. There is a soft start and protection against motor overheating.

The best of the relatively inexpensive pumps for wells with low flow rates and depths of up to 80 meters. The model pumps up to 2.7 cubic meters of water per hour, it is afraid of excessive sand content. Works great even with large voltage drops (plus or minus 10%). The engine is in an oil bath for better cooling and protection from water.

• Unlike most models designed for wells with a diameter of 100 mm, the pump can be installed in a pipe with a minimum size of 85 mm
• The 550 W motor ensures high performance at great depths. Can effectively work at depths of up to 20 m from the water surface
• "Floating" impellers of the pumping part are made of high-strength polycarbonate, which ensures high wear resistance of the mechanism and excludes jamming when small mechanical impurities enter the water
• With a starting capacitor and a thermal relay built into the housing, it is easy to install and operate the pump in automatic mode
• Reliable centrifugal mechanism of the flow part of the model ensures uniform water supply

• The borehole pump can operate with incomplete submersion, only 10-15 cm, which allows the model to be used in a dry season or in a shallow part of a reservoir
• The "floating" design of the impellers makes it possible to pump water with sand in an amount of up to two kilograms per cubic meter of water
• Serial number is laser engraved to confirm the originality of the model and to protect against counterfeiting
• Installed thermal relay, which protects the engine from overheating in emergency operating modes
• The presence of a built-in starting capacitor facilitates installation and operation of the pump
• Drainage channels reduce the load on the hydraulics and the electric motor when starting or shutting down the model

A good option for use in shallow wells with a small debit with a decent (up to 100 g / m3) sandiness. A productivity of 1.2 cubic meters per hour allows you to organize a complete automatic irrigation system. The power consumption is low, the noise is even less.

• A powerful submersible pump with a high productivity of up to 28 liters per minute provides the required amount of water for the household needs of a private house
• Strong loops at the top of the case make it easy to attach the cable to securely fix the device in working position
• The electric motor is designed for continuous operation under heavy load and is installed in an oil bath for efficient cooling and protection from moisture
• The working end of the shaft and the body of the model are made of high-quality stainless steel, which increases reliability, eliminates the possibility of rapid corrosion
• The pump motor is equipped with thermal protection, which excludes overheating and failure

A very inexpensive option for wells up to 50 meters deep. For such a price, you don't have to wait for something super reliable, but, according to user reviews, the unit lasts for a long time. The body is made of stainless steel and can be used in boreholes up to 110 mm. Low power consumption (up to 750 W) is a big plus.

This pump has the most simple device, due to which it can be used in any open-sand wells, including those with a minimum debit. The performance of the model is low - up to 1.5 cubic meters per hour, an excellent option for watering and other summer cottage purposes. Power consumption is very low - 550 watts.

• Submersible pump with built-in check valve, which prevents liquid outflow after the device is turned off
• Small body diameter (75 mm) allows the model to be used for almost any well
• Reliable electric motor ensures stable operation in unstable voltage conditions
• Due to the increased number of pump stages and the special shape of the blades made of wear-resistant material, a stable water pressure is ensured
• Simple collapsible design of the pumping part makes it easy to repair and maintain the model at home without the use of special tools
• The electric motor operates in an oil environment, which increases the reliability of the model and provides effective cooling of the motor