A good trailer is an option to increase the cargo capacity of the car, limited by the frame of the trunk. In addition, when using a trailer for transporting goods, the trunk will always remain clean. The most popular is the single-axle trailer type, which is characterized by acceptable maneuverability and is optimally suited for various domestic needs. Special trailers are characterized by a non-standard design and a rather narrow focus. This type includes products for the transportation of motorcycles, boats, snowmobiles, boats and other equipment.
The trailer body can be one-piece, welded, or assembled using bolted connections. Body coating is also important. The galvanized surface will last much longer and is not afraid of the influence of atmospheric precipitation. But the body, covered with enamel, is much cheaper.
We have compiled a list of the best trailers based on expert opinions and reviews from real buyers. Our recommendations will help you make the best choice for your requirements and desires. There are many competitors on the world market for equipment, but we have selected the best manufacturers and recommend that you pay special attention to them:
- MZSA
- Flint
- SST
- Husqvarna
- GORILLA
1 | МЗСА 817710 | 40 270 p. |
2 | MZSA 817701 | 49 930 RUB |
3 | Flint 2x1.3 CT (alko) | 28,000 RUB |
4 | SST 7132 with roof | 39,050 RUB |
5 | МЗСА 81771D / 81771C | 48 810 p. |
6 | Husqvarna Pros | 40 100 p. |
7 | GORILLA TRAILER 1500/1800 | 24,000 RUB |
8 | МЗСА for motor vehicles 817702 | 49 420 RUB |
Uniaxial
The main advantages
- The trailer is designed to transport large enough bulky and bulk goods for which the trunk of the car is too small
- The body of the trailer is designed as a tipping element, so the transportation of bulk goods becomes as convenient as possible. By using the dump truck function, you can significantly reduce the time for unloading
- The trailer leaf suspension with hydraulic shock absorbers was developed in Germany. Shock absorbers maintain a smooth ride even when fully loaded
- Galvanized steel is used to cover the trailer body; as a result, the frame is very resistant to corrosion and lasts a long time. The result is achieved through the use of hot-dip galvanizing technology, which creates a coating that is much more resistant than paintwork
- When moving on the highway, the main loads are taken by a special subframe, which is securely attached to the chassis of the trailer and significantly increases the reliability of the structure
The main advantages
- Single axle light trailer without braking system.Designed for the transportation of various goods, including construction, and loads of bulk material
- The steel frame is bolted together, which is much stronger than a welded assembly and makes it easy to replace parts in the event of a malfunction
- For protection against external influences, the frame of the trailer and the drawbar are covered with high-quality enamel
- The small size of the product allows its storage on a site limited in size
- The bottom of the loading platform is made of galvanized metal and covered with laminated bakelite plywood, which is not afraid of moisture
Biaxial
The main advantages
- A light two-axle trailer is designed for transportation of various tools, any household items, building material and motor vehicles
- The frame details are perfectly matched during installation. In the manufacturing process, galvanized metal is cut on laser machines, which ensures absolute precision in the manufacture of parts
- The leaf suspension, equipped with telescopic shock absorbers, together with rubber springs, allows the trailer to move easily and smoothly on the road
- Hinged sides (front and rear) provide additional convenience when loading / unloading. The inner surfaces of the boards, like the flooring, are sheathed with thick moisture-resistant plywood
- Additional equipment includes increased sides, special arches for the roof, several types of awning and support wheels
For motor vehicles
The main advantages
- The trailer is used as an accessory for light garden tractors. It allows you to deliver the necessary fertilizers to the site or bring the harvested crop to storage
- The body of the trailer is made of durable sheet iron and covered with high quality enamel, and the removable tailgate facilitates unloading and loading
- The iron sheets from which the sides of the trailer are made are additionally reinforced by stamping the stiffeners. This constructive approach increases the stability of the sides when exposed to dynamic loads.
- Pneumatic rubber wheels provide the product with the ability to easily overcome obstacles and bumps when driving over rough terrain
- With a large enough lifting capacity, the tipping mechanism allows you to unload the trailer in a matter of minutes
The main advantages
- Large carrying capacity (up to 350 kg) is the main feature of the trailer, designed for towing behind an ATV. It is widely used in private farms and gardening
- Lightweight body made of high-quality plastic is able to withstand high dynamic and shock loads that occur when driving
- Ball bearings are involved in the design of the wheels. Their use allows the trailer to move freely on loose and uneven roads.
- Polypropylene tires with high quality galvanized steel wheels can operate in a wide temperature range. The advantages of wheels include good noise absorption and low vibration.
- The high ground clearance can significantly increase the cross-country ability of the trailer. It can tilt not only backwards, but also sideways, which greatly simplifies unloading
The main advantages
- The model is well suited for transporting various motor vehicles and other goods. The trailer is used in personal subsidiary farming, as well as for targeted delivery of products
- We can note the wings made of high-strength plastic, which easily withstand minor shock loads and are completely not subject to corrosion.
- Additional dividing struts significantly increase the strength of the sides and increase the resistance to fracture
- The trailer is equipped with a special power subframe, which is structurally connected to the chassis. This element of the product takes on the main dynamic loads during movement.
- The steel frame of the trailer itself is assembled using bolted connections, which provides greater strength than when installing using welding
Tipper
The main advantages
- In a light trailer, you can put all the property necessary for a summer resident or a fisherman, you can also load a lot of bulk building materials or load motor vehicles necessary for transportation
- The standard version of the model is equipped with oversized sides and a protective plastic cover. This option is universal for the transport of goods in need of protection
- There is also a modification of the model with a high protective cover, which is made of high quality plastic. This option significantly expands the geometry and volume of cargo that can be placed on the platform.
- The galvanized V-shaped drawbar is able to withstand high dynamic loads. The structure is made of a closed-type steel profile, which makes it possible to protect the electrical wiring from external mechanical influences
- For the bottom of the loading dock, multi-layer plywood covered with foil and anti-slip properties was selected. The surface is resistant to moisture and is resistant to wear
For boats / jet skis
The main advantages
- Universal light trailer functions as a carriage for transporting jet skis, boats and light boats
- The cross members of the frame have a curved profile, which provides the lowest boat fit. The lowered center of gravity increases the stability of the product when moving
- Sliding hinges for securing the boat provide a more reliable fixation of the load and can be located at any point of the frame
- To ensure safe transportation, the load must be optimally balanced. Wheel travel allows you to adjust the position of the axle and the permissible force on the towbar ball
- The detachable design of the rear brackets with side lights makes it easy to dismantle the unit when launching, thereby guaranteeing the safety of wiring