Relevance:
The battery is the main source of electricity in a car. It depends on its state whether the engine will start or remain a "silent heap of metal". Charging is used to restore battery capacity. A high-quality and "smart" device will independently monitor the process and turn off at the right time. Unfortunately, even a serviceable and fully charged battery can fail at the most inopportune moment. In severe frost, the battery loses from 20 to 40% of its capacity and can hardly crank the engine with oil thickened in the frost, but you have to go ... A large starting current is required. A modern starting-charger can help out. It will revive the battery, if necessary, and start the cold engine in the cold.
We have compiled a list of the best starters and chargers, based on expert opinions and feedback from real customers. Our recommendations will help you make the best choice for your requirements and desires. There are many competitors on the world market for equipment, but we have selected the best manufacturers and recommend that you pay special attention to them:
- FUBAG
- AIRLINE
- Elitech
Categories
Battery support: 6V
Battery support: 12V
Battery support: 24V
Starting current: up to 300 A
Starting current: over 300 A
Built-in ammeter
Overcharge protection
| 1 | FUBAG Cold Start 300/12 | 5,000 RUB |
| 2 | FUBAG Force 420 | 11,000 RUB |
| 3 | AIRLINE AJS-55-05 | 3,000 RUB |
| 4 | Elitech UPZ 400/240 | 9 985 RUB |
| 5 | Airline AJS-400-02 | 18,032 p. |
* Prices are valid at the time of publication and are subject to change
without prior notice.
Battery support: 6V
Built-in ammeter
/
Overcharge protection
/
Battery support: 12V
/
Battery support: 6V
/
Starting current: up to 300 A
The main advantages
- A device for fast charging of batteries with a voltage of 6-12 V. The whole process takes up to 3 hours
- The engine can be started in extreme winter conditions at temperatures down to -20 ° С
- The metal case reliably protects the internal elements of the device and ensures a long service life
- Classic analog ammeter and mechanical manual adjustment of the charging current simplify the use of the device and increase operational reliability
- The device circuitry is protected against short circuit, polarity reversal and overvoltage, which increases the safety of the device
- Lightweight 7.4kg and comfortable handle make it easy to carry and transport
Show all products in the category "Battery Support: 6V"
Battery support: 12V
Overcharge protection
/
Battery support: 12V
/
Starting current: up to 300 A
More details
about
FUBAG Cold Start 300/12 (starter-charger)
The main advantages
- A modern powerful starter and charger to restore battery capacity or assist in starting vehicle engines
- High starting current up to 300 A allows the device to be used in a wide range, from a motorcycle to a truck or bus
- LED indication and a small informative LCD display indicate different operating modes and facilitate the use of the device
- The starter-charger has several degrees of protection. It automatically turns off when charging is complete, overheat and short circuit protection is installed. This increases the reliability and durability of the device.
- Lightweight, only 1.5 kg, for easy transport and storage
Show all products in the category "Battery Support: 12V"
Battery support: 24V
Built-in ammeter
/
Overcharge protection
/
Battery support: 12V
/
Battery support: 24V
/
Starting current: over 300 A
More details
about
FUBAG Force 420 (starter and charger)
The main advantages
- Professional grade device for battery charging and emergency engine start in case of insufficient amperage and battery capacity
- The charger is capable of recovering batteries of various capacities from 50 to 800 Ah, which expands the range of use of the device, since it can charge the batteries of almost all vehicles
- Four levels of current adjustment and six modes as a charger allow you to choose the optimal one for each specific case
- On-device ammeter and fast charge timer make it easy to check and use the model
- To ensure safety and extend the service life, protection against battery overcharge and overheating of the device circuit is implemented
Built-in ammeter
/
Overcharge protection
/
Battery support: 12V
/
Battery support: 24V
/
Starting current: up to 300 A
The main advantages
- Starting-charger for charging automobile and motorcycle batteries and emergency starting of engines of any vehicles and special equipment
- Thanks to the robust metal housing, the internal elements are reliably protected from damage, which increases the durability of the device
- The device circuit is equipped with several degrees of protection. It is protected against short circuit, overload or overheating to improve operational reliability and safety
- Intuitive control panel makes charging easier and more user-friendly
- Transport wheels make it easy to move, and a pocket provided for storing wires for storing the device
Show all products in the category "Battery support: 24V"
Starting current: over 300 A
Built-in ammeter
/
Battery support: 12V
/
Starting current: over 300 A
/
Battery support: 24V
The main advantages
- The built-in ammeter allows you to measure the amperage delivered by the product and monitor the battery charging process, including monitoring the characteristic when the engine is started
- Compact size and relatively light weight simplifies manual transport of equipment
- The inverter type of the unit regulates a longer duration of continuous cranking of the starter compared to classic transformer counterparts
- Supports 12V and 24V modes to charge batteries for both passenger cars and trucks
- Complete wires with clothespins have additional rubberized protection
Show all products in the category "Starting current: over 300 A"
