Best rating steel baths

If it is important for you to use every centimeter in the bathroom with benefit, then this model will suit you 100%. But compactness is not the only plus of Roca Contesa.

The 1.5mm steel is painted with high quality enamel - it is almost impossible to scratch it. Dirt is also not particularly lingering. Perhaps it is precisely because of the anti-mud properties that the coating seems slippery, you need to get used to it.

The set includes special stickers to reduce the noise level. Removable adjustable legs look nice, but for reliability it is better to order a frame right away.

The appearance is beyond praise: with a mounted screen, a bathtub cannot be distinguished from a cast iron one.

The thickness of the steel along with the enamel coating of this bathtub is declared by the manufacturer to be 2.3 mm - a very high figure, most of which is still in the paint. Besides the solid appearance, the thick walls significantly reduce the noise from the pouring water.

With the Kaldewei FORM PLUS 310-1 you will appreciate the ease of maintenance. Vitreous enamel is difficult to scratch and easy to clean from dirt.

The model is sold in several configuration options - take the more expensive one: the legs in it are more solid and reliable. The lack of anti-slip coating is a drawback, but not critical.

• A classic freestanding bathtub with a durable enamel coating that is resistant to the negative effects of light, mechanical damage and aggressive chemicals
• The body is made of stainless steel with a thickness of 2.4 mm, which ensures that there is no corrosion and deformation during the operation of the model
• The set includes additional handles that allow you to safely plunge into and out of a full bath
• The standard arrangement of overflow and drain facilitates installation. There is no need to purchase special expensive components and re-planning of sewage drains
• The included feet provide a stable position on the floor surface and greatly facilitate installation

• Household wall-mounted bathtub of rectangular shape. Easily mounted in a regular bathroom and does not require additional changes in the room for installation
• The case is made of high quality 3.5 mm thick steel, resistant to deformation and mechanical damage. This guarantees a long service life of the model.
• The bath surface is covered with three layers of double-fired enamel. Non-porous glass enamel finish with anti-slip properties
• Due to the absence of pores on the hard and smooth glassy layer, the accumulation of dirt and grease, as well as the appearance of mold and pathogenic bacteria, is excluded
• Soundproof rubber pads reduce the noise of falling water and increase the comfort of use

• Freestanding, versatile bathtub with anatomical proportions and clean geometric lines
• The steel case has been successfully tested for resistance to mechanical damage, abrasion and scratches
• High-quality enamel coating of the model is not afraid of the destructive influence of sunlight or the aggressive effects of chemical detergents. Keeps fresh and whiteness for many years
• Environmentally friendly material of the bathtub is completely recyclable at the end of its useful life and does not pollute the environment, as confirmed by the EPD (Environmental Product Declaration) certificate
• Standard location of drain and overflow facilitates installation and does not require additional changes in the layout of the room

• The model from the Advantage collection is distinguished by high quality materials, impeccable workmanship and excellent surface resistance to wear. The manufacturer claims a 30-year product warranty
• The light weight of the steel bath and the standard location of the drain and overflow openings facilitate installation and connection to the sewer network
• During the high-temperature treatment, the steel body merges with the enamel coating, forming a single whole. Thanks to this, the bath is resistant to mechanical stress, scratches and aggressive chemicals.
• The surface of the product does not require special care using expensive detergents. All normal non-abrasive cleaning agents and regular rinsing with warm water are sufficient
• It is made of metal with a thickness of 3.5 mm and has a high resistance to deformation. The steel of the case is specially heat-hardened at the factory to increase the strength and durability of the model

• The bathtub has a classic shape, made of stainless steel, which guarantees no corrosion, high resistance to stress and deformation, as well as a long service life
• The enamel coating with a glassy surface resists scratches and abrasion. It is insensitive to chemical attack and prevents the accumulation of fat and dirt deposits that contribute to the development of harmful bacteria
• The large mounting area of ​​the legs ensures the most stable position of the model and optimally distributes the weight to the welding points, preventing the appearance of chips during installation and further operation
• The support stand has a unique mounting system that increases the stability of the model. Children can safely frolic and have fun in the water without the fear of knocking over the bathtub
• Thanks to the antibacterial component of the enamel, you can safely bathe your pets in the bathroom. The component inhibits the development of pathogens and prevents their development

Looking for a premium large steel bathtub? Feel free to buy Roca Swing 180x80. Its thickness is 2.4 mm, of which 1.5 mm is high quality stamped steel.

Plus three-layer enamel, which ensures the reliability of the coating and its protection from microcracks and the effects of acids and other components of modern detergents. This design also provides good sound insulation.

Externally, the bathtub differs little from the cast-iron one: it has built-in armrests and chrome-plated metal handles.And, of course, you will appreciate the anti-slip grooved coating that makes this bathtub more than comfortable. The only drawback is the installation features: the legs are attached to double-sided tape, which is not very reliable.

By purchasing this bath, you yourself will write it down in the best in terms of price and quality. For a reasonable price, you will get a nice, large, comfortable and reliable bath.

The thickness is about 3 mm, slightly more than half of the enamel coating. The enamel is well applied, lasts a long time, is resistant to abrasion and chemical action of detergents (even very aggressive ones).

The anti-slip finish is a hassle-free experience, while the chrome handles add comfort. For reliability, additionally fix the legs; for noise insulation, you can stick a special film on the outside or use mounting foam.

It's not steel! - your guests will say when they see a cool and expensive bathtub made using a special technology. Indeed, outwardly, it is almost no different from cast iron, and in terms of the quality of the enamel (quartz, imprinted into the metal) and ideal geometry, it surpasses it. 3.5mm thick walls absorb the sound of pouring water.

You no longer need to scrub away stains with all your might - the easy-clean coating is cleaned without the use of aggressive detergents, and most of the dirt is simply washed off with water. It's a pity, even in such an expensive model, the legs leave much to be desired: in the most reliable position, the bathtub is too low, and increasing the height, you have to take additional fixation measures.

• A classic rectangular bathtub with a body made of high-quality steel, which heats up quickly and maintains a comfortable water temperature for a long time
• Ergonomic, human-shaped, 215L space for a comfortable fit and relaxes tired body muscles
• Anti-slip coating increases the safety of use and prevents possible injury while using the shower
• The design provides built-in armrests and chrome-plated handles that are installed on both sides.This improves the comfort and usability of the model.
• A high-quality enamel coating consists of three layers of 0.3 mm each. The first primer layer prevents the appearance of steel corrosion, the second connecting layer holds the enamel together and protects against the appearance of pores and microcracks, and the third provides a white glossy surface

• Freestanding 3.5mm thick-walled bathtub. Steel body perfectly withstands high loads and is resistant to mechanical damage
• Due to the unique technology of making steel with the addition of titanium, the case of the model is much stronger and more reliable than similar samples from other manufacturers
• Ergonomic angle of inclination of the wall that supports the back, increases the comfort of use and promotes effective relaxation of the back muscles
• The quality BetteGlaze enamel finish is scratch and abrasion resistant. It keeps the product looking neat over the years
• It is possible to install additional modules: anti-slip bottom, hydromassage

• Spacious steel bathtub with a sufficiently wide width and anatomical design, which allows not only to take water procedures, but to comfortably rest and relax with the whole body
• Environmentally friendly material from which the model is made is completely recyclable at the end of its service life and does not pollute the environment
• The product body has been tested for strength and resistance to stress and deformation in the factory
• Wear-resistant enamel coating is not afraid of the negative effects of sunlight, aggressive effects of chemicals, scratches and abrasion
• The bath is made of 3.5 mm thick sheet steel, which ensures the reliability and durability of the product

• Model made of high quality materials with a snow-white enamel finish. The special glass-ceramic enamel surface is not afraid of scratches and abrasion, as well as aggressive effects of chemicals. Easy to clean with common detergents
• The minimum weight of the model together with the support stand (29 kg) sets it apart from competitors. This facilitates delivery, especially in houses without a lift and installation in the bathroom
• The body of the bath is equipped with a welt, which allows placing small bathroom accessories in the corners of the side - shampoo, soap or other small items
• The product set includes a support stand, which ensures a stable position of the bath and greatly facilitates installation
• The body is made of high quality cold rolled steel with a thickness of 1.8 mm.Thanks to this, it was possible to reduce the weight of the model without loss of resistance to deformation and mechanical stress.