Bosch PFS 3000-2
Short reviewBuy Bosch PFS 3000-2
Bosch PFS 3000-2 specifications
The main | |
Main characteristics | |
Spray gun type | Electric |
Type of paint feed | Bottom tank |
Spray type | Pneumatic |
Maximum productivity | 0.3 l / min |
Tank volume | 1 l Other goods |
Compressor | Remote |
Spraying | |
Spray torch adjustment | there is |
Spray torch type | Vertical, Horizontal, Spot |
Power supply | |
Power supply type | 220 V network |
Power consumption | 650 Wt |
Equipment | |
Number of attachments | 2 pcs. |
Cleaning kit | there is |
Dimensions and weight | |
Height | 36.1 cm |
Depth | 27.7 cm |
Width | 32.3 cm |
Spray gun weight | 3.7 kg |
Additional Information | ALLPaint technology: easy spraying of paints of any type; Practical SDS system for fast paint filling and easy cleaning; ConstantFeed function for even paint flow even when working overhead or near the floor |
Colour | Green |
Bosch PFS 3000-2 reviews
I covered the boards with a septic tank along with the color scheme, I spent 40 liters of it, quickly, cleanly, comfortably. covered in the wind outside. pressure is good, I recommend.
No.
Everything is okay
This is my first spray gun. Before buying, I carefully and repeatedly re-read the characteristics and reviews of almost everything that is sold on vseinstrumenty.ru. I decided to stay on this model. I was bribed by the name, the ability to carry the "vacuum cleaner" itself on the shoulder, the power, well, and externally looked attractive in the picture. The order was delivered in 5 days. Took him and immediately into battle. In the morning I painted a 3-room apartment (ceilings) with the first layer within an hour, and in the late afternoon I also painted it with a second layer in an hour. The ceiling plinth had to be smeared with a brush. paint does not fall on them evenly and in places with smudges. With a roller, everything would take much longer, and the paint consumption would be much higher. In general, I did not even expect that everything would turn out so perfect !!!
The set includes two attachments. One for water-based emulsion, the other for various varnishes. The ceilings had to be painted a second because the nozzle for the water emulsion sprayed well, very roughly. You could say spat. I think this is all a trifle and just a lack of practice. And the second thing. A fairly decent stream of air constantly blows from the switched on device, and accordingly raises all the dust from the floor. Therefore, you will have to clean up perfectly before painting. Well, after all, the apparatus itself requires thorough rinsing, otherwise it will stick, dry out, etc.
I advise everyone. It is worth the money. In addition to the main functions, they can also humidify rooms, spray plants in the garden ...))
It helps a lot, priming the ceiling or walls is a matter of a few minutes ... the paint, if not very thick, then lays down well, a little longer than the primer
In general, it helps out very well, lighter, better quality and faster than a roller, especially when the paint dries quickly (the roller winds)
a small capacity is enough for 2-3 minutes, karska / soil quickly leaves, it is not convenient to top up a little, you have to constantly dance with a gun, the main blower and unfasten the tank.
if the paint is thick or dry in the nozzles, then it starts to spit
working under the ceiling is not very comfortable, it would be more powerful then it would be easier, hands get tired and there is fog
consumption is higher
The sprayer is good, but you need to get used to it, you need to try and adjust it every time you change the composition of paint or liquid. liquid must have a gray nozzle, paints are thicker like I / O with a white nozzle. Rinse regularly so that the nozzles do not dry out. Monitor and refill the reservoir regularly.
Under the ceiling, a lot is dissipated into the air, therefore, take into account the increase in consumption
During the painting, 100kvm has already adapted and got used to it, helped a lot, saves time and simplifies ... while the flight is normal, the sponge filter has already got dirty ...