Bulros FGK 320
Short review
Buy Bulros FGK 320
Bulros FGK 320 specifications
| The main | |
| A type | batch |
| Lamination speed | 560 mm / min |
| Min. film thickness | 60 μm |
| Max. film thickness | 250 microns |
| Max. material thickness | 2 mm |
| Format | A3 |
| Number of shafts | 4 |
| Lamination type | hot / cold |
| Heating time | 3 min |
| Features and capabilities | reverse, temperature control, photo lamination |
| Power consumption | 650 Wt |
| Dimensions | 500x200x110 mm |
| Weight | 7.7 kg |
Bulros FGK 320 reviews
Not expensive. Reliable, which is called "not kill". Works normally with films of different thickness, does not chew. A good resource - proven by operation.
no
I am using the second such device. The load is above average. The only subtlety - watch the position of the temperature sensor - it is pressed against the rubber shaft, if the pressure is strong, the furrow will remain over time. To buy new shafts later is a problem.
An excellent professional laminator. The advantages would include: uniform heating of the shafts, high heating rate and excellent pressure during rolling. also - the presence of 2 hot and 2 cold shafts, the reverse speed is also "+".
The only disadvantage would be its weight. (not for female hands)
The best office laminator. We use both for lamination of documents and photographs, and for thermo-sublimation transfer to metal and ceramics.
Recommended for purchase
Metal robust housing. Uniform and fast heating of the shafts. Reverse and cold lamination mode. Large selection of temperatures. Adequate price for a professional thing! Convenient access to shafts.
I got a product with a slight flaw. The metal reflector of the heating rolls is deformed and covered with small scratches. There was a suspicion that the goods were used. This confused me a little. At first I wanted to refuse the order. Then I thought about it and decided that this would not affect the work, especially since there is a guarantee of s / c. Cools down for a long time, you have to turn the shafts for a long time in the cold lamination mode. Weight! Very heavy! But you can't wipe off the table with your hand)
I was looking for a laminator for a long time. Too cheap did not inspire confidence, and expensive ones frightened off with a price. I settled on this model: price-quality ratio!
Perfectly proved itself in work!
Excellent laminator:
1) 4 shafts allow you to laminate evenly,
2) Cold and hot lamination,
3) Reverse
4) Ease of use
Not very long power cord
Laminator weight
I dug a lot of information, forums and reviews, settled on this - reliable, time-tested, simple.
Just what you need for a photo printing point.
