JONNESWAY S04H624101S

Advantages: There is almost everything to disassemble a car. Good quality ratchets, keys do not unbend from great efforts, heads do not burst, handles on ratchets and screwdrivers are resistant to oils, solvents, and are well cleaned.

Disadvantages: Weak metal at the torcs, the handle on the minus screwdriver turned (and then after 3 years). The lower part of the set is not fixed, if you open it with the wrong side, everything will sprinkle, if you do not use a foam rubber pad, then when worn, the entire bottom rattles (especially all small heads) and mixes.

Comment: I bought it myself in 2010 to repair a car, mopeds, and use it in the country. With this set, I can disassemble any moped, make MOT to the car (old woman). Of course, the new cars no longer use torxes, but peculiar stars that are not in this set. BUT I didn't buy it for this) I had to separately buy a clamp for myself and put a hammer in the car. I advise, but not for the same price as now)

Advantages: Strong metal, unscrewed the bolts with an internal hexagon of the crankshaft gear, put another 30cm pipe on a small knob, everything is fine, it did not bend. Rich enough equipment Everything in movable tools (pliers, adjustable wrench, ratchets) fits perfectly. All except for hex and Torx nozzles are chrome plated and do not rust. Rubber on the handles is dense, not slippery for hands.

Disadvantages: Without a foam gasket, all small heads will sprinkle.

Comment: As soon as the car appeared, the question arose with the instrument, but on the eve of his birthday, well, he asked for this particular set as a gift. Expensive, but bought once and for a long time. In general, I am very pleased with the set, but what is missing is available for purchase. I used pliers to bite through thin threads, tight adhesion of the cutting parts - even in the light, everything is tight. I thought that the adjustable wrench would be completely useless, but no, the lips are like gloved ones, they don't move by themselves, they don't dangle, they hold the nut-bolt confidently, there is a 2 cm scale, it will go for a caliper. The case is plastic, the latches are also good. Not much, but still the nozzles rusted. The nozzles are strong - I unscrewed the bolts on the crankshaft gear with an internal hexagon, so I had to build up a 30 cm pipe on a small knob, I unscrewed two bolts, on the third, the nozzle burst, but there was a specific effort. I smeared the rubber handles, washed them with water, and at least carry them to the store, as good as new. In the head under the nozzles there is a small ball for holding the nozzles, which is located under an elastic clamp, if you touch something with this clamp and it comes off, you can lose the ball, but it is very difficult to find the same one (I myself lost this ball, only found in a watch workshop replacement), so you have to be very careful. I try to use the tool carefully, everything suits me, it is expensive, but it is bought once.

Advantages: Quality

Disadvantages: The disadvantages of the kit include the absence of a hammer and a clamp - this is a fact. There are also no high heads, high torxes and sprockets in it, but this cannot be attributed to disadvantages, since the set contains only everything you need and you cannot squeeze the entire car service there.

Comment: I have been using this set since 2009. An irreplaceable assistant in the maintenance and repair of all family road and water vehicles. I don't use services, I do everything myself. During the operation, nothing broke, not a single head, not a single ratchet, not a torx, not an open-end wrench. The screwdrivers in their original form did not lick off at all. I use it very often, always at work. The cars are big, heavy, ten-year-old, there is something to twist, and sometimes through a pipe. Until now, the condition of the instrument is perfect. I bought it in 2009 for 5600 rubles. It paid off immediately at the first repair of the Renzha pneumatic system. Today's set price tag is 2 times higher, but rest assured - it won't let you down!

Great set, top quality ...

Advantages: Everything you need in one place and nothing more

Disadvantages: Not detected.

Comment: The only trouble - if the tool is wet and not wiped, it rusts over time (extension cords, heads, cranks). But you yourself need to be more careful with the instrument. I was also surprised by the strength of the suitcase itself. Accidentally dropped the car from the jack onto the suitcase, which was under the rear bumper. So the suitcase deformed a little, and then straightened back. And the car is no less than the Chevy Suburban.

Advantages: Strong, versatile

Disadvantages: Heavy, in the wind the pad of foam constantly flies away, you have to press it in the open position with something, a head, for example. A tight big cardan in the kit, it was not developed during operation, but I rarely used it

Comment: I have been using it since 2008. During this time, I lost one head, bought a new one and replaced it. These are all the problems that were with the set. Very strong ratchets, you can rip off any bolts, which I do, no problem.I bought, as far as I remember, at that time for 6,000 rubles, but if now another one is needed, I will give the money that is asked for it without question.

Advantages: quality steel

Disadvantages: paralon lining of poor quality

Comment: the paralon lining could be made more qualitative. for 10,000 rubles then. and the instrument itself is pleasant to hold in hands, very pleased with the purchase.

Advantages: There is almost everything you need.

Disadvantages: Everything is okay

Comment: I touched the replacement of the brakes and, alas, the head by 13 was not deep enough to unscrew the parking brake cable. Fortunately, it was from a different set.

Advantages: A large number of different attachments. Decent quality.

Disadvantages: Large weight of the tool case. Let's hope the weight speaks to the strength of the kit elements.

Comment: I only speak for 2 weeks. let's see what will happen next.

Advantages: Price = quality.

Disadvantages: After a year of tinkering in the trunk of the car, rust went (moisture got into the trunk, there was a puddle in the place for the stock). I don't think another instrument would have held up. After this incident, I greased everything with oil and the tool as new.

Comment: I have been using it for 5 years. Suitable for work in a car service. Only a German instrument is better.