Makita JR3070CT

Advantages: High-quality, Reliable, Powerful, Vibration protection, Pendulum movement of the canvas. Universal Tool.

Disadvantages: No Illumination of the working area.

Comment: I bought for 15,700 on 12.08 2015 Assembly China. For cutting foam blocks (dismantling partitions, replacing heating batteries, interior doors, cutting fittings when passing a wall (cross) Saws without sparks, cuts everything, quickly and confidently! The most important thing is to buy saber blades for each job and choose the operating mode (speed). aerated concrete blade (1900 r) but it is only suitable mainly for dismantling, if a more accurate cut is needed, then this is another skeletal type blade with a stiffener. Decent apparatus, very much helps in the work when other tools are not strong! Verdict in category saber saws The best! (220 volt mains)

Advantages: Saws amazing, good damper, no recoil. Sawed sheet metal 3 mm.

Disadvantages: It would be nice if there was a backlight with a "target designator". It takes skill to cut evenly.

Comment:

Advantages: -Makita. - Whoever wrote that you can't crawl into hard-to-reach places for her, you just crawl, but you can't crawl with an ordinary hacksaw, let alone a grinder. Somehow I'll take a photo, and maybe a video report. The gap between the pipes-loungers DU56 and the risers comes in deftly and cuts quickly (and crookedly, but this is a matter of skill). For dismantling with residual water in the system, it fits perfectly. 63 pp-pipe, it turns out smoothly and without snot as if cut with a grinder or "scissors".

Disadvantages: -The price of the canvases makes you use the canvases themselves super-carefully.

Comment: They also write that if the stem is recessed into the body and you need to remove the canvas, then you have to "catch" the moment by pressing and releasing the power button. So I don't do this "game", because my finger most calmly crawls into the recessed part of the casing and just as calmly turns the lock to the "open" and "close" position (without removing the stop). You can also try to take the canvas with your hand and pull it up and it will smoothly come out with the lock to you in free access (DO NOT FORGET TO RELEASE THE POWER SUPPLY!). Or very smoothly press the start button, then the stem will smoothly "come out" to the upper position.

Advantages: Powerful, anti-vibration, 6-speed, pendulum, etc.

Disadvantages: Is that the price

Comment: I work as a mason's assistant, took a saw on the fly. It makes life much easier when sawing a gas block, also cut openings, boards and much more for it. Very good tool, pays for itself 100%

Advantages: Anti-vibration, pendulum stroke, smooth adjustment of the stroke rate with a button while limiting the maximum stroke frequency of the file with a regulator wheel located in a convenient place (you will not accidentally knock it off), weight is also an advantage for me, high power - it heats up a little under load, constant frequency of the saw stroke when the load changes , one of the longest sawing strokes

Disadvantages: The cost

Comment: I bought it for use in a private house. The Makita JR 3070 CT is a tool for many sawing applications. Saws as you direct (this is about "curvature"). They write that this is a tool mainly for destruction, but for me it is one of the most demanded tools for making something. I saw different materials: wood, plastic, aluminum, iron (just pick up the saws). It is a pleasure to work for her. If possible, then buy - you will not regret it (it has everything that should be in a saber saw).

Advantages: I use it for dismantling and other works. That's what you need.

Disadvantages: While I like Everything.

Comment: It is difficult to find files for dismantling mixed structures, but this is not a saw problem.

Advantages: "Anti-vibration" system, maintaining speed under load and much more

Disadvantages: Price, but a good tool is never cheap

Comment: An excellent all-round tool. Suitable for dismantling everything and everyone, as well as for building. Accuracy depends only on the hands, but you need to understand that a reciprocating saw is not a facing. Sawed a lot of aerated concrete, a lot of boards with and without nails. He cut down trees, cut blanks for construction. Buy files from relatives or other good manufacturers and you will be happy

Advantages: Reliability Power Vibration suppression system AVT Includes: case and 3 different files Pendulum stroke Blowing of the working area

Disadvantages: Price

Comment:

Advantages: To list the advantages, one must have a comparison with other similar tools, and I have a reciprocating saw for the first time. But I love it !!!

Disadvantages: 1. Specifically, the rubber boot on the gearbox stinks. 2. Absolutely dumb case / suitcase. Extremely uncomfortable. 3. Heavy.

Comment: I liked the saw. What did you like there, I am wildly delighted !!! Guys, this is a tool !!! I am not a professional worker or assembler / dismantler. I just took it for myself, for the house. I met on the Internet the opinion that reciprocating saws are the most suitable tool for dismantling everything and everything, for destruction. And somehow calmly passed by, I did not need such a tool, tk. I also have other tools: chain saws, grinders and a jigsaw. What else does? But then I suddenly saw this saw for the action, and read the reviews. I decided to take it, let it lie, it will come in handy someday. ) I didn't like three things: 1. The saw jerks. Specifically, the rubber cover on the gearbox stinks, which makes me think of China. About fake China. Maybe I'm winding it up myself. 2. Absolutely dumb case / suitcase. It's big, but even placing the instrument there is a problem. It's hard to believe, but it is. The body of the instrument itself lays down without problems, but there is so little space for the cord that it does not fit, you have to twist it with wire or Velcro.Well, there is nowhere to put more or less long files. It would be better just a suitcase - bare walls and that's it. 3. It is heavy. I worked with it three times in total. A 3/4 pipe with a cloth that was included in the kit cuts like butter !!! Without straining at all! And two more amazing moments. It works much quieter than a grinder !!! And absolutely no sparks !!! For me, the absence of sparks is very important because I live in a wooden house. There is a little vibration, like a jigsaw, probably. In terms of accuracy, it cannot be compared with the same grinder, probably, or maybe you just need to fill your hand, and take the files shorter so that they do not swing their tail to the right and left. But what I will say for sure - in the overwhelming majority of cases it will replace my grinder, I can see it for sure! ) What can I tell you guys? I am amazed!!! And why didn't I have it before ??? !!! Immediately ordered all sorts of different saw blades, for several years to come, let them be, they do not deteriorate. )

Powerful, slightly heavy, but not critical. I did not find any shortcomings (except for a suitcase, in which it is impossible to put additional saws of a greater length)