Ten years ago, 3D printing was not available to the general masses, but everything has changed. Now everyone can buy a printer that can print almost any part. The relatively affordable price and good quality make you think about purchasing this item.
But attractive design and attractive prices are not enough. Before purchasing equipment, it is important to familiarize yourself with the basic parameters and capabilities of the printer. It is necessary to understand what type of printing is used, whether the interface is clear and how easy the initial setup is. Only after studying all the positive qualities of the device, you can proceed to the acquisition.
We have compiled a list of the best 3D printers based on expert opinions and reviews from real customers. Our recommendations will help you make the best choice for your requirements and desires. There are many competitors on the world market for equipment, but we have selected the best manufacturers and recommend that you pay special attention to them:
- Wanhao
- XYZprinting
- BQ
- Flashforge
Categories
Budget
Print technology: FDM / FFF
Print technology: DLP
Material: ABS / PLA
Material: photopolymer
| 1 | Wanhao Duplicator i3 | 22,000 RUB |
| 2 | Wanhao Duplicator 6 | 53,000 RUB |
| 3 | XYZprinting da Vinci Mini | 24,000 RUB |
| 4 | XYZprinting da Vinci 2.0 Duo | 50,000 RUB |
| 5 | Wanhao Duplicator 10 | 18,300 RUB |
| 6 | Flashforge hunter | 300,000 RUB |
* Prices are valid at the time of publication and are subject to change
without prior notice.
Budget
Material: ABS / PLA
/
Print technology: FDM / FFF
/
Budget
The main advantages
- The assembly of the printer is carried out with a few bolts, so it does not take much time. All you need to get started is to assemble the frame and connect the connectors
- The print bed has four bolts in the corners. With this adjustment, you can achieve an even distribution of resistance over the entire surface.
- The printer itself detects the type of plastic and automatically sets the required temperature
- On the display of the control unit, the entire process is shown by the loading scale and the number of percent
- The hardware unit is compatible with Windows, Apple and Linux. For correct operation, you need to install the driver and software
Material: ABS / PLA
/
Print technology: FDM / FFF
/
Budget
The main advantages
- The printer is equipped with a Wi-Fi module, which makes it possible to print from anywhere in the house without being tied to wires
- At startup, there is an automatic calibration option. Alignment is done by software, which reduces the risk of defective parts
- An NFC-tag is installed in the cartridge with a plastic thread, which allows you to determine the amount of raw materials. Before printing, the program makes a calculation that helps determine the amount of plastic. If there is not enough filament, printing will not start
- The platform on which the part is printed is equipped with a sliding carriage
- An LED is installed in the housing to indicate events. A specific color will give information about the printing status and printer health
Budget
/
Material: ABS / PLA
/
Print technology: FDM / FFF
The main advantages
- The large touch screen allows you to conveniently control the printing process and monitor abnormal situations. The display shows all the necessary information - percent ready, extruder temperature, print time
- The nozzle and moving parts are closed to prevent injury and burns. Even children can safely use the printer
- Despite its small size, the print quality of the printer is not inferior to the quality obtained on the older models of the manufacturer
- Detachable magnetic platform and honeycomb surface allow easy and secure attachment of the model to the table
- The printer is easy to use thanks to the included intuitive software
Show all products in the category "Budget"
Print technology: FDM / FFF
Material: ABS / PLA
/
Print technology: FDM / FFF
The main advantages
- The set comes with a 4GB SD card. For convenience, a card reader is also provided
- The width and length of the working space is 200 mm, the height is 175 mm. Can print a 17.5 cm cube
- The printer control unit is equipped with an additional memory card slot. This approach excludes interruption of communication during data transfer, which means that the product will have the correct shape.
- The thickness of the printing layer can be from 0.02 to 0.3 mm. The thinner the diameter of the applied plastic, the better the part will be.
- A navigation wheel is installed in the control unit. This option will allow you to quickly and accurately switch between menu items
Material: ABS / PLA
/
Print technology: FDM / FFF
More details
about
XYZprinting da Vinci 2.0 Duo (3d printer)
The main advantages
- The printer has a closed design that maintains one temperature. Uniform heating of the entire space will significantly improve the quality of the part, protecting it from negative environmental factors
- Automatic cleaning of the nozzle is performed after each printed part
- The printer is delivered assembled. To get started, you need to remove the device from the box, install the software, and connect the power cord and USB cable
- Installed a dual extruder that prints two colors at the same time. Each cartridge is made in the form of a cassette, which makes it easy to replace consumables
- XYZWorld Community Cloud Library is available. The catalog contains a large number of layouts of interesting products
Show all products in the category "Printing technology: FDM / FFF"
Print technology: DLP
Material: photopolymer
/
Print technology: DLP
The main advantages
- Thanks to the use of DLP technology, in which the entire layer is cured at once under the influence of ultraviolet light, the printer has a good print speed
- The printer comes with everything you might need when printing - polymer, a set of spatulas, USB cable, flash drive, a set of screwdrivers, tweezers, gloves, various baths and rags
- The printer works right out of the box with no additional setup or calibration required. You only need to fill in the polymer
- Built-in 7GB memory and Wi-Fi connectivity greatly expand printer installation and sharing options
- Low cost of ownership due to compatibility with a variety of resins, including inexpensive
Show all products in the category "Printing technology: DLP"
