The correct choice of a case for a computer depends not only on its external design, but also most importantly - a convenient layout of components inside, a noise level indicator and high-quality cooling. When choosing a computer case for a specific motherboard, it is necessary to predict the further expansion of the device, the possible arrangement of additional large graphics processors with large cooling systems, additional drives, etc.
The "hardware" of a computer is aging rapidly and technically. The service life of the hull is much longer than that of the internal components. The choice of housing must be approached carefully, taking into account the possible modernization in a few years.
We've compiled a list of the best PC cases based on peer reviews and customer reviews. Our recommendations will help you make the best choice for your requirements and desires. There are many competitors on the world market for equipment, but we have selected the best manufacturers and recommend that you pay special attention to them:
- Zalman
- Deepcool
- Cooler master
- Aerocool
- Thermaltake
1 | Zalman Z1 | 2 304 p. |
2 | Zalman Z9 Neo Black | 4 200 RUB |
3 | Deepcool Tesseract SW | 2825 RUB |
4 | AeroCool Playa Slim | 4,379 p. |
5 | Thermaltake View 21 TG CA-1I3-00M1WN-00 | 3 894 p. |
6 | Thermaltake Core V21 CA-1D5-00S1WN-00 | 5,050 RUB |
7 | Cooler Master MasterCase H500M | 14,030 p. |
8 | AeroCool Aero-500 Black Edition | 2212 p. |
9 | Deepcool Matrexx 55 Black | 2890 RUB |
10 | Zalman M3 Plus | 0 p. |
11 | AeroCool Glider Tempered Glass | 0 p. |
12 | AeroCool Cylon TG | 0 p. |
13 | Thermaltake H100 TG CA-1L4-00M1WN-02 | 0 p. |
14 | Thermaltake Premium A700 TG CA-1O2-00F9WN-00 | 0 p. |
With good cooling
The main advantages
- The control attributes are placed on the right side of the top cover. Indication of drive activity and power supply removed for visual monitoring
- All ports (USB and audio) are covered with special rubber plugs. They prevent dust settling and the possibility of short circuits
- The top panel is made of durable plastic and has an unusual design. The protruding rim marks the ventilation hatch, which can be dismantled to improve ventilation
- The seat for the power supply unit is made in such a way that it can be mounted both with the lower mounting of the fan, and with the upper
- The ventilation system of the chassis consists of five 120mm fans. The rear receives power through a three-pin connector. The other four are connected to power supply by "molex"
The main advantages
- Large usable capacity and effective cooling of Tesseract SW cases are equally suitable for assembling gaming systems and computers based on ATX motherboards
- The motherboard is mounted on a panel, where a hole is provided, which allows you to mount the cooling system without dismantling the motherboard
- Two bays with plastic locks are for 5.25-inch devices. They are equipped with a slide for easy assembly without the use of tools
- The case is designed for six cooling fans
- There are seven expansion slots on the back, there are two holes for mounting an external liquid cooling system
For gaming PCs
The main advantages
- The low-profile, slim form factor significantly saves space in the work environment and allows it to be installed in both standard horizontal and vertical positions using the included stand
- Cyclic Flow lighting supports 13 RGB rendering modes for beautiful bright lighting
- The base console panel in the front of the case includes two USB 3.0 ports, audio ports for microphone and headphones, start / restart buttons for the motherboard, and an LED backlight control
- The presence of seats for 80 mm coolers in the lower and upper parts of the product improve heat dissipation from its interior
- Optimized base space predetermines the installation of a Micro / Mini ATX motherboard, low-profile discrete graphics card, two standard HDD / SSD and an external ODD
Budget
The main advantages
- The manufacturer has allocated three seats for the placement of external compartments. Two of them are traditional size, and only 3.5-inch devices can be inserted into the outer compartment
- All control components and interfaces are placed on a convenient front panel. There are three USB ports and connectors for connecting a microphone and headphones
- The manufacturer has provided seven slots for installing expansion cards. Two holes for the CBO hoses provide for the installation of the cooling system
- An original special niche on the panel allows you to put devices included in the USB port there
- Constant air circulation inside this model is provided by two fans on either side of the chassis. They are based on a sleeve bearing and are of the low speed type.
Up to 3000 rubles
The main advantages
- The budget case can be used to build a home or office computer, as well as gaming systems based on modern AMD or Intel processors
- There is a ventilation duct on the side cover for installing an additional 120 mm cooler
- The top panel contains all modern connectors for connecting peripherals, as well as a control unit for cooling fans
- The user can install five additional coolers, as well as a liquid cooling system (LSS)
- Air filters are provided to trap dust and prevent circuit boards from short circuiting. Detachable design allows them to be dismantled at any time for cleaning
The main advantages
- Tempered glass on the front and side cover for a premium look and custom styling
- The case is supplied without fans, allowing the user to independently choose the SVO according to their needs and hardware power. A total of 6 coolers can be added
- Case dimensions allow installation of liquid cooling system and video cards up to 370 mm in length
- An air intake system is located on the front panel, which ensures effective circulation inside the case using 120 or 140 mm coolers
- The power supply cage is located at the bottom, allowing you to install a fan at the top of the rear panel to blow out warm air from the processor
Up to 5000 rubles
The main advantages
- Compact body made of high quality metal. The location of the compartments inside allows for optimal placement of all components inside, as well as creating an effective air circulation system
- Special filters prevent dust from getting inside, ensuring smooth and safe operation of boards
- It is possible to install liquid cooling or a CPU cooler up to 185 mm high
- A large (200 mm) fan is built into the case. Additionally, there are seats for six 120 mm and three 140 mm coolers
- 3.5 mm bays are compatible with the 2.5 mm standard, and equipment is mounted without screws and additional tools
Water cooling support
The main advantages
- Four mm thick tempered glass side panels allow you to view the inside of the case from both sides without losing the strength characteristics of the product
- Branded dust filters are securely fixed to the inner surfaces using magnetic tape, easily removed and cleaned
- Separate internal bracket allows you to mount your graphics card vertically
- The modular structure of indoor units implies their removal to expand the space for the installation of a liquid cooling system
- Universal motherboard tray design supports any OEM form factor
Backlight
The main advantages
- Any graphics card can be installed to create the most powerful AMD or Intel-based gaming builds
- A full-size window is provided on the side wall, allowing you to create an interesting design with the help of lighting
- Two powerful 200 mm coolers are hidden behind the transparent front panel, which are distinguished by their quiet operation and high efficiency.
- Built-in RGB lighting is connected and controlled by the motherboard via the 3PIN connector, as well as a button on the case, creating a variety of lighting options
- Both walls are removable. Special overlays and channels allow you to completely hide the wires