LED strip is a great alternative to standard lighting fixtures. This lighting option can act both as an additional light source and as decorative lighting. The tape has gained popularity due to its positive qualities, such as compactness, durability, ease of installation and maintenance.
There is a wide variety of LED strips on the market, which differ in light color, brightness and degree of protection. Before buying, it is important to decide on the scope. You also need to get acquainted with all the advantages of the selected product.
We have compiled a list of the best LED strips based on expert opinions and reviews from real customers. Our recommendations will help you make the best choice for your requirements and desires. There are many competitors on the world market for equipment, but we have selected the best manufacturers and recommend that you pay special attention to them:
- Navigator
- Arlight
- ERA
- Feron
1 | Arlight 010346 RT 2-5000 24V Warm2700 2x (3528, 600 LED, LUX) | 2,000 RUB |
2 | ERA LS5050-60LED-IP20-W | 1,000 RUB |
3 | Feron LS606 60LED SMD5050 RGB ready-made kit | 1,500 RUB |
4 | Arlight 011571 RT 2-5000 24V Day4000 2x (5060, 300 LED, LUX) | 3,000 RUB |
5 | Arlight 010366 RTW 2-5000P 24V RGB 2X (5060, 300 LED, LUX) | 3,500 RUB |
For ceiling
The main advantages
- The LED strip does a good job of scattering light. The glow angle can reach 120 °, which is enough to illuminate showcases and shelves
- The lifespan of the LEDs is up to 50,000 hours, which equates to 8 years of continuous operation. If you use the tape for 8 hours a day, the service life will last up to 20 years
- The back side has a surface with increased adhesion. The construction is able to firmly adhere to almost any smooth surface
- The density of LEDs is 120 pcs / m, which allows for a brighter glow of 4100 lumens
- LEDs are immune to physical and chemical influences, which significantly expands the scope of their application - any transport, places with high humidity, under the influence of direct sunlight, in dusty workshops, in stores
Size: 5050
The main advantages
- Self-adhesive backing will help to avoid complicated preparatory and installation work. All that is needed for installation is to degrease the surface, remove the shipping film and attach the tape
- The minimum bending radius can be 20 mm, which allows the tape to be used for lighting confined spaces
- The LEDs have a steady stream without flicker, which will help reduce eye strain and reduce fatigue
- The tape is energy efficient. Consumption is up to 14.4 W per meter, which allows you to turn on the light for a long time
- Despite its low energy consumption, the LED strip provides a fairly bright glow up to 5 lm (per LED)
Size: 5060
The main advantages
- The viewing angle of the LED strip reaches 120 degrees, which helps to use it not only for decorative purposes, but also as a partial replacement for lighting
- Each LED emits white daylight, which is pleasing to the eye and will not cause fatigue or headaches during long-term use
- Copper pads are treated with an antioxidant soldering solution to reduce soldering time
- The five-meter tape contains 300 LEDs, which create a luminous flux with a total power of up to 6500 lm
- The maximum current consumption can reach 3A, allowing you to significantly increase the brightness of the glow of each lighting element
The main advantages
- The minimum length of one module can be 100 mm, which allows lighting in confined and hard-to-reach places
- The tape is packed in a reel, which greatly simplifies the transportation and installation of the LEDs. Plastic protection and antistatic film will protect fragile parts from damage
- Low voltage safe for human life is used for the functioning of all elements.
- The use of modern glow elements helped to get rid of most of the restrictions - vibration, shock, critical temperatures, switching cycles
- Even with prolonged heating, the structure does not emit an unpleasant odor and retains its working properties
Color: RGB
The main advantages
- The ready-made LED strip kit includes a 90 W driver (power supply), an additional connector, a switch and a controller
- The tape copes well with heat dissipation and does not require an additional aluminum profile as a passive radiator
- The contact pads of the conductive tracks are covered with a special solder paste, which speeds up the installation process without using adapters
- The connection of resistors and LEDs is made using a group soldering in a special oven, which improves the strength and durability of the connection
- All elements of the LED strip are covered with a protective varnish that prevents corrosion and oxidation
- Using a dimmer, you can adjust the brightness of the glow and customize the LED operating modes