Best rating heat guns

Placed in a compact case, a class A heating element made of cermet with a power of 3 kW provides 250 cubic meters of warm air per hour. The fan allows you to disperse this air in the room up to 25 sq. meters, warming it up in half an hour. You can dry clothes in a directed stream. Service life - 10 years. There is a thermostat.

Compact device with two power levels - 1000 and 3000 W. Its main advantage is its high build quality. Together with a good ceramic heating element, this ensures durability and reliability. Designed to heat a room up to 20 sq. meters. There is a fan mode.

Such a gun can be used to heat an industrial production site, store, warehouse, garage, dry damp walls and roofs. It has two power levels: 7500 and 15000 watts. Two available heating elements are very reliable, withstand large voltage drops. The device is turned on only in a 380 V network.

• New generation compact electric heater with sintered metal heating element
• Impact-resistant metal housing protects the anti-corrosion coating for increased reliability and extended device life
• With the built-in thermostat, you can set and maintain the required temperature in the room
• Thanks to the updated A-class sintered heating element, power consumption is significantly reduced without loss of power, which helps to save money
• The heater is equipped with protection against overheating, pulling or twisting the cable. This increases the safety of using the device.

A powerful premium device is used for heating large construction, industrial and other buildings. The maximum gas consumption is 3.29 cubic meters per hour. With a power output of 46 kW, this is a very good indicator. The efficiency is close to 100%, no smoke is generated during combustion. However, you need to ventilate carefully and seriously.

This 10 kW heat gun, working on both liquefied gas and propane, is good because it can very quickly heat a room up to 25 square meters. meters, while spending no more than a liter of fuel per hour. The efficiency is close to 100%. The device is insensitive to temperature changes and can be easily transported. There is a multilevel protection system.

• Gas heat generator for industrial use for heating industrial premises, warehouses, greenhouses, as well as defrosting trenches, heating concrete or drying walls when carrying out repair and construction work
• It has high efficiency due to complete combustion of fuel (propane). The ambient air is not contaminated with harmful chemicals contained in combustion products
• Simple and easy to startthanks to the installed piezo ignition system with an unlimited working resource, which guarantees a long service life without service
• A control system for the presence of flame, electricity and heater temperature is installed. In case of violation of operating parameters, the gas supply is automatically stopped. This increases the safety of using the device.
• The heater body has an anti-corrosion coating. Double walls reduce heat loss during operation and protect against burns in case of direct contact with the body

• Gas heat gun in a robust metal case with anti-corrosion wear-resistant powder coating and double walls with excellent thermal insulation of the outer casing
• A thermostat is installed that protects the device from overheating and failure, which increases the reliability and durability of the device
• The heater is equipped with an automatic shutdown system in the event of a power failure or minimum fuel level. This increases the safety of using the model.
• The safety valve is equipped with a thermocouple for flame supervision. If the combustion process is disturbed, the gas supply stops
• The high efficiency of the device ensures economical fuel consumption (propane, butane) and its complete combustion without the release of harmful chemical compounds into the environment

The best all-round diesel heat gun. With a power of 26 kW, it can be used in small rooms from 50 sq. meters, and in industrial production or hangars up to 150 sq. meters. A removable canister is used as a tank. Diesel fuel consumption - 2.2 liters per hour. Due to the almost complete combustion of the fuel, the efficiency approaches 100%.

This compact 10-kilowatt diesel cannon has a long runtime: it can run for up to 15 hours at one refueling. The design uses spark plugs, which is not typical for this segment. The cannon can heat a room up to 70 sq. meters, dry walls, roofs, building materials. There is a flame control system.

An excellent option for rooms from 100 to 150 sq. meters. A 20-kilowatt cannon consumes about 2 liters of fuel per hour, and with a tank volume of 24 liters, one cycle of operation can last 10-12 hours. There is a flame control system that does not let the fire go out. The weak point is the switch, be gentle with it.