Ballu BHP-M-15
Short review
Buy Ballu BHP-M-15
Ballu BHP-M-15 characteristics
Yandex.Market data
| General characteristics | |
| Principle of operation | electric |
| Max. heating power | 15 kWt |
| Maximum air exchange | 1100 m³ / hour |
| Control | mechanical |
| Voltage | 380/400 V |
| Protective functions | overheating shutdown, thermostat |
| Temperature control | there is |
| Power adjustment | there is |
| Ventilation without heating | there is |
| Handle for moving | there is |
Ballu BHP-M-15 reviews
Yandex.Market data
Advantages:
Simple controls. High precision thermostat.
Disadvantages:
-
Comment:
Heats the tool warehouse in autumn and winter. In the summer, we just turn on the ventilation. Quite a comfortable handle and a low weight of 15 kg, so it is convenient to rearrange. There are two powers, if not very cold, then we turn on the ventilation with partial power, if it's cold, then at full power. If it overheats, it does not turn on immediately, safe.
August 21, 2018, Kinel-Cherkasy
Advantages:
powerful engine; body with anticorrosive treatment; precise thermostat; the safety thermostat is manually reset
Disadvantages:
didn't see
Comment:
took a cannon to heat the warehouse. The assembly is of high quality, stainless steel heating elements are made. Heats up a huge room quite quickly. There are no foreign smells from it and the body does not heat up.
12 September 2018, Moscow
Advantages:
It warms well and promotes uniform heating of the room due to intensive mixing of hot air.
Disadvantages:
No
Comment:
Believe it or not, now we are heating the boiler room! We are just building a new one, next to the old one. She's not the first time. No care is required. Dust does not drive the equipment from the field, the supports keep it above the floor. The thermostat prevents the room from overheating. If necessary, you can direct the heat to the desired area.
November 10, 2018, Rostov-on-Don
Advantages:
3-phase plug, bimetal thermostat
Disadvantages:
There is no mating plug.
Comment:
We heat the raw warehouse with a cannon. It has a stable footing, dust does not rise from the floor during work. Powerful engine with dust and moisture protection. The thermostat does not jump. We set the power to medium in order to save. It is convenient that there is a plug for 3 phases, it does not heat up during operation. If the electricity is blinking, the autostart protection is triggered, turn on the gun manually by restarting.
September 5, 2018, St. Petersburg
Advantages:
Transportable, stable, directional flow, 3-phase power supply.
Disadvantages:
No
Comment:
Indispensable for electrical work in cold rooms. In the passport, it is effective up to 150 m2, but in reality we have enough for large objects. The thermostat did not fail. Additionally, there is overheating protection.
October 9, 2018, Moscow
Advantages:
Safety, reliability, quickly heats up the room.
Disadvantages:
The cord is too short, I had to buy an extension cord.
Comment:
I bought a gun for additional heating of the garage in winter, when there are severe frosts. I coped with 5 points out of 5. I installed one on the wall, everything is easy and simple. Two power modes, as well as ventilation mode. If something is specifically warmed up, you can directly direct the stream to this place. First of all, it was very important for me that there is a manual restart button and that it turns off when it overheats (safety first). For the whole winter I have never failed.
August 12, 2018, Rostov-on-Don
Advantages:
Three-phase plug; heating power; Heating element made of stainless steel, thermostat, overheating protection
Disadvantages:
No.
Comment:
Stands in the weighing warehouse, where there is always "blowing" and cold. My faithful assistant is already the second year, and in all seasons (except summer). True that year, and in the summer they turned on, the whole June was cold. Warms really powerful, no stench.
August 16, 2018, Moscow
Advantages:
Convenient connection (there is a 3-phase plug), protection against auto-start
Disadvantages:
not found
Comment:
In our (100 sq.m.) auto-painting shop, we cannot replace it due to its power, high-precision thermostat (for high-quality hardening of l / c coating, a certain temperature is required), anti-vandal coating and delayed shutdown of the blower (so that the heating elements cool down).
July 25, 2018, St. Petersburg
Advantages:
Prompt heating of the room. Due to reliable supports, I calmly install the gun on an uneven surface.
Disadvantages:
The set lacked a mating part for the plug, so I had to buy it.
Comment:
It copes well with its task of heating a car service. Moreover, even when I set the heating to half power mode, the electric gun heats up the car service room in less than an hour. I regularly use the ventilation mode without heating. Despite the fact that the gun works all day, I did not notice the increased power consumption.
October 18, 2018, Samara
Advantages:
There is a manual restart of the thermostat, ventilation mode without heating, a convenient carrying handle, stainless steel heating elements, a case with anti-corrosion treatment and a heat shield
Disadvantages:
Until I saw
Comment:
I have a warehouse in a place where there is no central heating. I bought a heat gun there for heating. Handles a large room quite well. There is a powerful engine with protection from dust and moisture. The thermostat precisely maintains the desired temperature. Depending on the temperature, I change the power, for support I do not set it to full in order to save electricity. Enough and so. It is convenient that there is a plug for 3 phases. During operation, it does not get very hot, there is no burning smell.
July 26, 2018, Kirov
