Autoprofi DT-04
Short reviewBuy Autoprofi DT-04
Autoprofi DT-04 specifications
The main | |
A type | vertical (bottled) |
Two-pin | Yes |
Lifting mechanism | hydraulic |
Max. load | 4 t |
Min. pickup height | 158 mm |
Max. lifting height | 380 mm |
Autoprofi DT-04 reviews
Comfortable, low-160, high-rise
minor flaws, but no case, the paint is easily scratched upon impact, and the main thing is how lucky in terms of build quality.
I needed a small jack for 160, which would raise it high, since on my car (Toyota) the clearance is 180 in the summer, 170 in the winter (low prof), and you don't know where the failure of a puncture of the wheel will find. maybe it's asphalt, but if the forest is uneven road and what then? jacks rhombuses let down - 2 pieces out of order (snack carvings) In general, I took a long time to decide because I was embarrassed by the bad review written here. But he made up his mind and bought -Thing !!!!! convenient from all sides, as I planned, lifts perfectly, high, small, pot-bellied, heavy under the car easily enters 1 cm, unscrew the bolt and lift. From the beginning, when lifting, a large stock comes out for the whole, then a small one. Tfu tfu tfu no complaints. Time will tell. 24 months warranty.
Low, 2 stem
The cost of eliminating the deficiency is 3 rubles.
SUVs lift up with a bang, and 2 wheels at once. Was mowing, the cost of elimination is 3 rubles and 2 minutes of time. Immediately replaced the oil with dextron 3. After replacing the oil, he certainly raised it, but when it was added to it, excessive air pressure was created in it and because of this it did not fold completely and raised the piston rod to the limit to the top, it was necessary to pull out the plug to bleed pressure. This all happened due to the fact that he etched oil from the pump rod, solved the problem by replacing the O-ring with a smaller inner diameter and a thicker base, costing 3 rubles, everything took a couple of minutes of time, then he added oil, pumped it over and now the jack plows like a beast.
Works.
No.
I bought it to replace the regular one on Rexton (my native one broke down), chose the minimum and maximum height of the regular one. Stopped at this. I changed my shoes for the winter, it turned out much faster than turning my own mechanical bottle, especially down :)
Due to the size, it did not fit into the regular place for the jack, but it can be modified with a file, which I am going to do over time.
Low on the catch! Raising by 3 tones was successful! (After repair)
Resistant!
Not anymore!
I got it a little over a year ago! I didn't turn it right away, I was covered in oil! I thought it was transportation, but no! Checked in 2 months on a forest road! Lived for a day, there was no one! And the fact is that during the assembly, the ring lifted up that holds the oil from the first piston! Came from the fuel filter (diesel)! And now a great jack!
Moderate size for such a good reach, but thanks to the telescopic stem for that. Weighty - it is hoped that it is made of normal metal. The carrying capacity allows you to lift not only cars.
I would like a case for him, but not critical.
I bought it for changing shoes for cars, I'm tired of poking around with a rhombic one. The size was pleasantly surprised - it fit under the KIA Rio, the rise, of course, without problems. But the Grand Vitara did not manage to lift the rear wheels, the departure was not enough. I put a block in - all the way. I'm happy so far.