Deepcool UF140

Advantages: - Quality of execution. - Silence. - The strength of the air flow. - A set of adapters and extension cords. - The design is simply beyond praise! - Rubberized coating and silicone fasteners. - Wire length 40 cm

Disadvantages: Yes, in principle, they are not!

Comment: Brought to order. The price is 500 rubles. Very satisfied! Strong air flow. It blows out the entire body without any problems! Tuned at 900 rpm - not audible at all! If you just bring your ear to the body, you can hear a stream of air. The fan itself does not emit any noise, squeaks or crackles! Maybe someone will come in handy that the fasteners are like 120ki, with a diameter of 140 mm. Well, karsiv! What else can I say! This turns out to be just as important.

Advantages: Quiet and draws air perfectly. The rubber base of the body and the silicone fasteners for the bolts perfectly dampen vibrations. Several adapters included.

Disadvantages: Lack of speed regulator included. Well this is so nitpicking. For some it will seem a little expensive.

Comment: I am using the second month. When I wondered about buying a 14cm cooler, it turned out that it was a problem to find them in our local stores. Ate-ate found, only Deepcool UF140 were available. Although it is a little expensive (600 rubles apiece), I bought a pair and it was right. There are 3 "holes" on the body of my Thermalteykovsky for 14cm fans. Before that, there were 3 pieces of 12 cm TFD-12025GT12Z / LD1 titans with backlight (the computer glowed like a Christmas tree), these titans, especially in such an amount, are noisy to say the least and barely draw air. In addition, if you put a 12cm cooler on the case behind a local 14cm (both are attached), there are slots on the sides of the cooler that are far from ice. In general, I changed 3 titanium (12cm), for 2 dipkula (14cm) I sealed the extra hole with tape so as not to interfere with the correct traction in the inside of the body. As a result, it became much quieter and in terms of temperature inside the case, a gain of 2-3 degrees turned out. Conclusion: Deepcool UF140 is expensive, but worth the money. Really quiet and powerful at the same time, a rare combination. Recommend.

Advantages: The most important advantage is that you cannot hear it at minimum speed. In addition, good equipment, packaging and workmanship - the cooler is rubberized, with all the necessary adapters included + anti-vibration nails.

Disadvantages: Price Noisy at maximum speed (conditional disadvantage). Installing baskets in a confined space in front of hard drives is a very serious test for the psyche and sleight of hand.

Comment: Some time ago I was concerned about reducing the noise of the computer and the temperature in it. The first step in this direction was the purchase of the UF140, bought it up to a heap for the motherboard and RAM, in fact inclined towards more expensive Noctua or something like that, but decided not to bother and made the right decision. The first time I connected it through the chassis (speed 1200), put it on the air in front of the hard drives, it seemed that it was not making noise. I replaced the old power supply unit (it was noisy the most), removed the video card behind it (9800gt, was in second place in terms of noise).After that, the volume of the computer dropped significantly, but not enough, I decided, and again reached inside the computer. It turned out that in third place in terms of volume is uf140 at maximum speed. I stuck it through the 7-watt adapter in the kit, and at first did not understand that it was working :) At the minimum speed it is really silent. Considering that it sits on the complete anti-vibration nails - it also does not create vibrations, although it depends on how to plant it - at first I installed it unreliably, the fan jumped off one mount and shook strongly, although it did not transmit vibration to the case, I noticed it accidentally when I took it apart. The main problem is to install on these same nails - an extraordinary task.

Advantages: PWM 4-pin. Nice and soft body. Anti-vibration pimples included. Cute. Quiet. Powerful.

Disadvantages: Mounts to make them disappear.

Comment: I bought 5 pieces for cooling the Thermaltake Core V21 case. Due to the peculiarities of this case, such coolers did not fit on the top-side panels - because the mounts on the cooler are like 120mm, and the size is like 140. This is very important and should be taken into account when buying. As a result, the coolers went into the Thermaltake Versa H18 case, and in the V21 they took the usual "square" Thermalright ones, there was only one such on the rear panel - it sits "normally" there. the slot has holes for 120 and 140mm fans. It can be fastened only by the complete pimples - the bolts sit in it "vnatyag" - there is no thread inside, it is almost rubber - and can fall out very easily. If not for the moronic mount, there would be a cooler without flaws.

Advantages: Rubberized Pretty Quiet Good Bundle

Disadvantages: Complete rubber bands are poorly suited for fasteners

Comment: Not a bad fan. Took a couple for the case. Suitable for 120 mm seats. 4-pin connector, includes additional wires for power supply and 4 rubber bands for fastening. It was not possible to fix them on them, I had to use my own screws and ties.

Advantages: Nice looking, 4-pin and silicone nails included

Disadvantages: There can be problems if the seat is only designed for mounting a 140mm cooler.

Comment: Due to its shape, it fits into the seats of 120mm turntables.

Advantages: Appearance - looks cool, soundly and rich! Several adapters included, it's just great!

Disadvantages: There were no silicone nails in my kit, although there are nails in the instruction picture!

Comment: Nice, well-made fan. Although its dimensions are 14 * 14 cm, it is attached as fans of 12 * 12 cm in size. Through the Molex adapter, you can connect a voltage of 7V, not 12V, while the fan will run quieter. In my case, the adapters were not useful, I used a native cable with 4 pins, the motherboard has a connector with 4 pins for connecting PWM fans, i.e. the motherboard monitors the temperature inside the case and the fan speed.