Thermal Grizzly Kryonaut
Short review
Buy Thermal Grizzly Kryonaut
Thermal Grizzly Kryonaut Specifications
| The main | |
| Thermal conductivity (W / mK) | 12.5 W / mK |
| Thermal interface composition | thermal grease |
| Thermal paste weight (grams) | 5.5 g |
| Thermal paste packaging | syringe |
| Number of thermal pads | no |
| Maximum working temperature | + 350 ° C |
| Minimum working temperature | -200 ° C |
| Equipment | syringe, applicator 2 pcs. |
Thermal Grizzly Kryonaut reviews
thermal conductivity, easy to apply / remove (resembles mx-4) paddle included even with 1gr
the price is 1gr, it is cheaper to take 5gr, but again the price of the package bites.
upon contact with air (the tube is not closed, about a day), applying the paste becomes problematic (like ztg)
I scalped my 3770k and changed the factory thermo-sealer for this miracle.
as a "bonus" (before that there was mx-4 between the cooler and the protsic), the temperature dropped by about 6 degrees without load and 8-10 degrees under load. it turns out that the higher the temperature, the higher the thermal conductivity.
Well the pasta is good
If you take into account the price, then mx4 is more profitable and so the difference in temperatures is small
I used everything for half a year, but I saw a review where they wrote that it was as if the surfaces of the cooler and the process from it were oxidized. I took it off, but still smeared mx4 from sin. Now I think it's true or not whether anyone had such cases
Everything that they write, I agree.
No.
Maybe I don't really understand, but ... For a fairly long time, everything works fine. There were glitches with the video card and keyboard, I smeared the chipset on it, it passed. I recommend doing it where, some time after using the motherboard, some problems went. So everything is fine, everything works, I recommend it! Who scolds, apparently in order to take something else.
