Wester PSS-10
Short review
Buy Wester PSS-10
Specifications Wester PSS-10
Yandex.Market data
| Main characteristics | |
| A type | percussion, pistol |
| Chuck type | outer square |
| Pressure | 6.14 atm |
| Air flow | 145 l / min |
| Air connection diameter, inches | 1/4 |
| Inner diameter of the hose, mm | 9.5 |
| Connection type | rapid |
| Maximum noise level | 83 dBA |
| Torque adjustment | there is |
| Torque | 155 - 570 Nm |
| Number of revolutions | 7500 rpm |
| Landing square, inch | 1/2 |
| Reverse | Yes |
| Equipment | quick release adapter EURO, hex wrench, oil for pneumatic tools in an oiler |
Opinions about Wester PSS-10
Yandex.Market data
The impact wrench is of excellent quality. I had another one, worked for a year, then began to "pour in". A couple of times I bought spare parts, repaired, changed something, but the power was not the same. As a result, I bought this wrench and for almost a year now there have been no problems with it. I have never failed, now even the "stuck" nuts are turned off once or twice. Very satisfied.
22 March 2019, Moscow
Advantages:
High performance tool with excellent striking mechanism. Rotation speed 7500 rpm. There is almost no noise, and also recoil. And the hand is protected from the air flow. Rubberized handle to hold the tool comfortably. There is a mesh filter to prevent fine dust from debris from entering the device. There is a regulator for changing direction and changing speed. A very handy tool. I have been using pneumatic tools for a long time and this wrench is one of the best pneumatic tools in my arsenal ..
Comment:
13 February 2019, Moscow
Advantages:
A very decent wrench. It lies comfortably in the hand, turns it powerfully, even takes the stuck on normally, and without tin, it never licked the edge, a competent effort in general)) Plus, because of the size, you can safely work for a long time if necessary
Comment:
January 28, 2019, Moscow
Advantages:
Powerful, securely assembled. Reasonably priced.
Disadvantages:
There are no obvious downsides.
Comment:
My husband and I have a small car service, we constantly need to update the tool, the Vester wrench has already established itself as reliable. The master has approved the purchase.
January 16, 2019, Nizhny Novgorod
Advantages:
price-quality ratio
Comment:
the instrument is worthy of attention. I bought it and did not regret it. Convenient, simple, not heavy. Now I do all the tire work in the garage, I don't have to go to the service, and my father-in-law, now looks at me. And on his old penny, you can twist the fig nuts, but this wrench copes with a bang. In general, I recommend it for shopping.
December 30, 2018, Moscow
Advantages:
It is convenient to work with a wrench, it is simple, reliable and powerful. The working pressure of just over 6 atm allows the nuts to be tightened with a high torque.It was assembled perfectly, fell into the pit a couple of times - there were no problems in the work.
Comment:
December 14, 2018, Moscow
Advantages:
Powerful, comfortable grip, reliable, if it falls to the floor, nothing will fall off. All characteristics correspond to the declared
Comment:
When I bought it, I thought it was a small one, but as it turned out, it was actually quite powerful and very convenient. I immediately checked it at work, changed my car at home. I did it in 30 minutes. The wrench is excellent, worth the money.
November 30, 2018, Moscow
Advantages:
Powerful tool, tackles any nut.
Disadvantages:
It works for me.
Comment:
Recently in work, while there are no comments, if anything, it's under warranty.
23 November 2018, Moscow
Advantages:
Nice tool. There are adjustments for torque, which is important for me, because you can easily roll the head of a bolt with such an effort and then suffer with welding a nut or drilling out the rest of the bolt. With a blow and preparation, you can even unscrew a bolt that is tightly attached.
Disadvantages:
none.
Comment:
I liked the big torque - 570 Nm. It helps a lot when you need to wrap something for centuries)
March 30, 2019, Moscow
Inexpensive and normal. Quite cheerfully copes with nuts of any complexity, in general, there have never been any problems. It is convenient for them to operate, the requirements for the compressor are low. Unless he was worn out outwardly right away, but maybe this is a question for me, literally in a week he turned into a well-deserved veteran in appearance :)
March 26, 2019, Moscow
