In the modern world, one cannot do without household appliances. It is quite difficult to acquire it, so it is important to think about its protection. A lightning strike, a breakdown in a power plant or in a transformer box can damage the device. Often times, power surges leave irreparable damage to important parts, and the only option is to buy new equipment. It is important to think about buying a high-quality surge protector that will protect against sudden voltage surges and short circuits. Each model may differ in its features and appearance. To choose a quality item, you need to be well acquainted with the main positive aspects.
We've compiled a list of the best surge protectors based on expert opinions and feedback from real customers. Our recommendations will help you make the best choice for your requirements and desires. There are many competitors on the world market for equipment, but we have selected the best manufacturers and recommend that you pay special attention to them:
Budget / Inexpensive
- Xiaomi
- MOST
- Pilot
Dear / Premium
- APC
1 | APC PM6U-RS | 1 930 RUB |
2 | APC P43B-RS | 821 p. |
3 | APC PM5U-RS | 1 915 RUB |
4 | MOST ERG 2m | 770 p. |
5 | Pilot Single | 1,154 p. |
For computer
The main advantages
- There are three indicators on the body of the device that indicate the status of operation. Information is provided about the health of the protection, the presence of grounding and overload by power
- The wire is securely fastened to the base of the case and protected from kinks and chafing
- The filter has wall brackets. The case can be hung both vertically and horizontally. It is possible to lay the wire to the left or to the right, using special grooves
- The connectors for the plug are located at the top and at the end. The wires of the connected devices will not be kinked, which will prolong the life and prevent them from kinking
- USB connectors are provided for charging gadgets
Sockets: 4
The main advantages
- The device uses an automatic fuse for easy recovery.In case of overload, all parts remain in working order, protection does not need replacement and repair
- The operating temperature of the device is from 0 to 40 ° C. Storage is allowed in the range from -15 to 45 ° C
- Body materials are fully RoHS compliant. The filter does not contain toxic substances that can harm your health
- Three degrees of protection are established. In case of failure of one mode, the rest continue to work in the same state
- Built-in overload warning indicator. If the LED is on, several devices should be turned off
Sockets: 5 or more
The main advantages
- Two USB ports allow you to replace standard chargers. A power supply unit is installed in the surge protector, capable of delivering a voltage of 2.4 A. There is enough current to charge almost all mobile devices
- The product is capable of damping radio frequency and electromagnetic interference that can adversely affect the operation of connected equipment
- An indicator has been installed to indicate incorrect wiring
- For protection, metal oxide varistors and fuses are used, which instantly cut off the current supply in the event of a surge in the network
- The device is capable of passing a current through itself with a load of 10 A. As soon as this value is exceeded, the protection will operate
The main advantages
- The surge protector has four CEE 7/4 Schuko sockets. There is also one connector for CEE 7/16 Europlug
- The length of the cable built into the housing is 2 m.The wire itself is protected by a strong, but at the same time flexible braid, resistant to constant mechanical stress
- The line filter is protected against overload or short circuit. In the event of a fault, the automatic fuse will trip
- A separate switch is installed for each section, which greatly simplifies the control of individual equipment. Prevents wear on plug and socket
- The housing has special holes for attaching the filter to a vertical surface
For socket
The main advantages
- Before switching on, the mains filter performs a short check of the input voltage (may take 20 seconds). After diagnostics, the indicator will light up, indicating the operation of the product
- The mains voltage indicator has five possible signals. During normal operation, the green indicator is constantly on. In case of low load, the yellow LED is on, if the indicator is critical, it starts blinking and cuts off the current. This also happens at high voltage, but the indicator color is red
- The device has a built-in microprocessor for continuous voltage level monitoring
- Capacitive filter installed to suppress high frequency interference
- The switch provides voltage protection up to 380 V