Relevance:
Most of the surfaces that surround us are far from smooth or even. Rough concrete or natural stone surfaces, burr wood and plastered room walls need additional sanding. Previously, these processes were done by hand, bringing uneven surfaces to perfection. A very long and laborious process, practically not applicable on an industrial scale.
Grinding machines will help to speed up and facilitate the work. Corner, belt, vibrating ... Different in design and power, design and price, they replace tedious, monotonous hand movements, making rough surfaces perfectly smooth. Different manufacturers offer many options, but you need to choose one, and it is advisable not to make a mistake.
We have compiled a list of the best grinders based on expert opinions and feedback from real customers. Our recommendations will help you make the best choice for your requirements and desires. There are many competitors on the world market for equipment, but we have selected the best manufacturers and recommend that you pay special attention to them:
Budget / Inexpensive
- DeWALT
- Hammer
- Makita
- ZUBR
- BOSCH
Middle price category
- Makita
Categories
Type: eccentric
Type: tape
Type: corner
Type: vibrating
Speed regulation
Battery operation
Dust collector
| 1 | Makita BO5041 | 6 589 p. |
| 2 | Makita BO5031 | 5,044 p. |
| 3 | Makita 9404 | 16 375 p. |
| 4 | Hammer LSM 800 B | 5,499 p. |
| 5 | ZUBR USHM-P230-2100 PV | 5,290 p. |
| 6 | BISON USHM-180-1800 PM3 | 3 950 RUB |
| 7 | Makita BO3711 | 4,000 RUB |
| 8 | DeWALT DWE6411 | 5 980 p. |
| 9 | DeWALT DCG414N | 13 579 p. |
| 10 | Hammer LSM 1000 PREMIUM | 9 799 p. |
* Prices are valid at the time of publication and are subject to change
without prior notice.
Type: eccentric
Dust collector
/
Speed regulation
/
Type: eccentric
The main advantages
- Universal grinder for processing materials of different hardness. She can remove large layers with coarse sandpaper and perform fine, accurate finishing sanding of the product
- The electric motor is equipped with reliable protection against contamination by dust or dirt and can withstand heavy loads during continuous operation
- Surface treatment can be done in two ways - simple rotation or swinging rotation. This allows you to select the desired mode for a specific type of material.
- Regardless of the load, the electronic control system maintains the required number of revolutions, which increases rotation stability and processing quality
- The dust collector will save the premises from harmful workings, preserve the health of the staff
Dust collector
/
Speed regulation
/
Type: eccentric
The main advantages
- Lightweight sander (1.3 kg) is easy and comfortable to grip thanks to rubber pads on the body that reduce vibration, making it easier to grip and manipulate the tool
- The wide and conveniently located start key makes it easy to start and stop the tool during operation. The key itself is rubberized and protected from dirt and dust, which increases reliability and extends the life of the grinder
- Robust motor can handle continuous loads with 300 watts of power
- Dust removal takes place through a base plate into a dust collector or a vacuum cleaner connected to the machine. To connect to the latter, an adapter is not required, which saves on the purchase of additional accessories
Show all products in the category "Type: eccentric"
Type: tape
Dust collector
/
Speed regulation
/
Type: tape
The main advantages
- Belt sander, with the ability to use both professional and domestic
- Easy to use thanks to its well-balanced body, which makes it possible to use it in difficult operating conditions
- Electronic control of engine speed and automatic centering of the sanding belt provide a stable load on the surface to be treated during grinding work
- Design features allow work directly along the edge of the surface (near a wall or vertical furniture elements)
- With the help of the tool, you can process not only wooden parts, but also products made of stone, plastic or metal, which significantly expands the range of applications
Dust collector
/
Speed regulation
/
Type: tape
More details
about
Hammer LSM 800 B (grinder)
The main advantages
- Tool for sanding wood, fiberboard / chipboard, plywood or paintwork with powerful 800 W motor and 45 mm belt length
- Rubber pads on the main handle and the presence of an additional handle allow you to conveniently fix the tool during operation. This is especially true with high engine power to increase operator safety.
- The electronic speed control system from 120 to 290 m / min makes it possible to choose the optimal grinding option for a particular type of material
- Blocking the "start" button will prevent accidental activation of the machine and protect the operator from injury, and the treated surface from damage
Dust collector
/
Speed regulation
/
Type: tape
The main advantages
- Belt sander with a power of 1200 W and a belt speed of 500 m / min is designed for processing various surfaces
- The body of the machine is made of shock-resistant reinforced plastic, resistant to mechanical damage, which increases the reliability of operation
- The speed controller allows you to select the required operating mode for a specific type of material
- The start button is equipped with a lock against accidental activation to increase safety and prevent injury
- Thanks to the installed dust collector, there is no dust suspension in the air and the treated surface remains clean. This allows for better control over the grinding.
Show all products in the category "Type: tape"
Type: corner
Type: corner
The main advantages
- Grinder for working with wood, iron, stone and concrete with appropriate attachments
- Due to the special design of the gearbox, in a case of increased strength with improved heat transfer, the grinder is not afraid of high loads and long operating time
- All important internal parts of the tool are protected by labyrinth seals from dust and dirt, which increases the reliability of the tool and extends its service life
- The stator and rotor of the electric motor are covered with several protective layers of varnish and a nylon band. Abrasive dust and other types of pollution will not be able to get on the turns of the winding of the electric motor and disable it.
- Long network cable for good portability
Type: corner
More details
about
BISON USHM-180-1800 PM3 (grinder)
The main advantages
- The original design of the gearbox housing with increased strength and improved heat dissipation, for increased reliability and increased tool life
- Variable position of the main handle to help you find a comfortable position when working in difficult conditions or confined spaces
- When the brushes are completely worn out, they automatically turn off. Replacement is done without disassembling the tool
- The wide IP5X dust-protected off / on key features an accidental start lock and key lock for uninterrupted operation to keep the user safe and help optimize tool performance
- Inrush current can be limited to avoid surface damage and operator safety
Show all products in the category "Type: corner"
Type: vibrating
Dust collector
/
Speed regulation
/
Type: vibrating
The main advantages
- Professional grade vibration type sander.
- The tool is equipped with an efficient dust extraction system directly from the sanding plate
- It is possible to connect a vacuum cleaner or a standard dust collector, which ensures the cleanliness of the treated surface and the absence of dust in the air at the workplace
- Ergonomic body and handle with rubber pads for a comfortable grip allow you to manipulate the instrument even with one hand
- Large, improved special jaw makes sanding paper changes easier and faster and saves working time
- The oscillation frequency can be adjusted from 8000 to 22000 per minute, depending on the density of the material and the selected operating mode
Dust collector
/
Type: vibrating
More details
about
DeWALT DWE6411 (grinder)
The main advantages
- Low Noise and Light Weight Vibration Grinder
- Replacing sanding paper is not particularly difficult. The operator can choose fastening with Velcro or traditional - with clamps. This facilitates the exchange of abrasive material and significantly saves operating time.
- Hermetically sealed bearings on all moving structural elements provide the tool with additional reliability and extend the life of the grinder
- Thanks to the adaptation to the AirLock system, the dust container can be connected without an additional adapter, which increases the convenience of working with the machine and saves on accessories
Show all products in the category "Type: vibrating"
Battery operation
Battery operation
/
Type: corner
The main advantages
- Well-balanced angle grinder, one of the best in its class, belongs to the FlexVolt range (complete replacement for corded tools)
- When the grinder is turned off, the electronic braking system is instantly triggered and the spindle stops in 1.5 seconds. This increases safety and reduces the risk of damage to the treated surface.
- Automatic braking engages in the event of a jammed or pinched tool
- Autonomous power supply from Li-Ion battery DeWalt FlexVolt 60v Max guarantees long-term operation of the instrument, both indoors and outdoors. The working time depends on the load and the complexity of the surface to be treated
Show all products in the category "Battery operation"
