Electrolux Smartfix 2.0 6.5 TS
Short review
Selected in the rating
5
Best rating
instantaneous electric water heaters
Inexpensive
Buy Electrolux Smartfix 2.0 6.5 TS
Electrolux Smartfix 2.0 6.5 TS Specifications
Yandex.Market data
| Main characteristics | |
| Water heater type | flowing |
| Heating method | electric |
| Performance | 3.7 l / min |
| Power consumption | 6.5KW (220V) |
| Number of taps | one point (gravity) |
| Inlet pressure | from 0.70 to 6 atm. |
| Modes and functions | |
| Water heater control | mechanical |
| Protection systems | |
| Protection | from overheating |
| Protection against water | 4 |
| Characteristics of heating elements and heat exchangers | |
| Electric heating element | Heating element |
| Heating element material | copper |
| Heating element power | 6.50 kW |
| Installation and equipment | |
| Installation | horizontal, bottom connection, mounting method: wall-mounted |
| Equipment | tap, shower head, shower hose |
| Dimensions (WxHxD) | 270x135x100 mm |
| Weight | 1.3 kg |
| Additional Information | cord with plug is not included |
Opinions from the Electrolux Smartfix 2.0 6.5 TS
Yandex.Market data
Advantages:
Compact, shower and faucet included. Low price, high build quality.
Disadvantages:
Conditional disadvantage No. 1 - the power supply cable is not included in the kit. But this is logical: with such a power, a serious cable is needed, and the length must be selected locally. And you need to disconnect the cable not just into the plug, but either directly into the electrical panel, or into the socket of the electrical stove (if any). Conditional disadvantage # 2 is not the device that "brought it in, turned it on and use it", i.e. requires hands that grow from where you need to.
Comment:
(I bought it in Yulmart for 2660r, and a review from there.) I am very satisfied! 6.5 kW is the minimum! Enough for a normal hot shower, almost medium pressure! You shouldn't take less. I bought the cable, as recommended in the instructions - 3x4 (mm sq.). It is better to buy just such a section, not to save money, since even this one heats up a little. It took 8 meters, which is a plus of 560 rubles. Plugged in the electric stove in the kitchen. Water connection: - removed the shower hose from the mixer in the bathroom, - connected the heater inlet to the shower outlet with a hose from the box, - the shower hose to the heater outlet. And voila - I have hot water from the shower! When they give it hot, I will warm it up in the morning, while it flows cold.
12 July 2015, Kirishi
Advantages:
One watering can is enough for a bathroom. You can wash yourself without any problems during the hot water shutdown Simple operation, low price, small size and weight. A watering can and a tap are included, although it's better to use something else.
Disadvantages:
Like all flowing water heaters, it requires separate electrical wiring (after all, 6500 watts is not small and you cannot plug it into an outlet) so there are no wires in the kit so that someone does not think of it)))
Comment:
Before that, it was the same but at 5.5 kW, there was not enough power. After 2 years, exactly 5 days after the warranty expired, one ten was covered. Ie heats only 1 out of 3 of the power. It was decided to buy the same one to put in the place of the deceased. As a result, it turned out that version 2.0 has different mounts from the first version. I had to hammer the wall again. The operating procedure is simple, connect as indicated in the instructions, turn on cold water, turn on the heater, wash. Turn off the same way. Turn off the heater, wait until the flowing water has cooled down, and only then turn off the cold water. I am completely satisfied with the device
June 27, 2014
Advantages:
Powerful, safe, convenient installation.
Disadvantages:
Soiled, dirty spots are poorly washed off the surface.
Comment:
Compatible with RCDs.
4 July 2019, Moscow
Advantages:
The build quality is good, everything is included in the kit for use. Unless there is no power cable and an RCD. Heats the water quickly, 3-4 seconds and the water is warm. 6.5 kW, mode III, heats the water up to 65-70 degrees (you can adjust the temperature a little by pressure). There are all rubber goods, filters, fasteners.
Disadvantages:
Fragility of the front cover.
Comment:
The lack of power wiring is a plus. It is better to immediately purchase a good (3x6kv.mm.) And a 32 Ampere RCD. Plus the cost of the device is another 1000-1500 rubles. You can get by even cheaper.
June 14, 2019, Nizhny Novgorod
