Eurolux IWM-190
Short review
Selected in the rating
10
Best rating
welding machines
Manual arc welding - For summer cottages - For home - For pipes - Inverter
Buy Eurolux IWM-190
Eurolux IWM-190 specifications
Yandex.Market data
| Main characteristics | |
| Device type | welding inverter |
| Welding types | manual arc welding (MMA) |
| Welding current (MMA) | 10-190 A |
| Input voltage | 140-260V |
| Number of supply phases | 1 |
| Output current type | constant |
| Duration of inclusion at maximum current | 70 % |
| Electrode diameter | 1.60-5 mm |
| additional characteristics | |
| Degree of protection | IP21 |
| Weight | 4.75 kg |
Reviews about Eurolux IWM-190
Yandex.Market data
Advantages:
Compact, lightweight, not expensive.
Disadvantages:
1. Very short welding cables. 2. The seal sticker is located extremely badly (it turned out to be damaged when the device was first removed from the box). 3. He quickly overheated (current is 120 A, half of the electrode D = 3.2 mm is used up). Since the seal "broke" and the guarantee was "covered", opening the device showed: Power diodes - one in series, two parallel welding circuits (although there are free places on the board for installing two more diodes - greed!). All for a maximum current of 50 A. And this is with a declared operating current of 190 A ??? (Obviously, this was the reason for the rapid overheating). The same can be said about the power keys - there are two, although you can solder four (economy!).
Comment:
In general, the device is not bad. After the installation of additional power diodes, it stopped overheating.
June 28, 2017, Wedge
Advantages:
1. The 3rd cooks excellently on a twist from 90 to 160 A. At 190 A on a twist, the current for the 3rd is too large - it splashes. 4th did not try, I think it will pull but on the verge. 2. low weight - 3 kg. - very lightweight. 3. the dimensions are super compact. 4. Metal case without plastic - nothing will fall off. 5. large switch key - it is convenient to turn it on in leggings, and not as on a resant where you need to take off gloves. 6. The fan works very quietly (in comparison with others), the switched on device does not bother and does not cause a desire to turn it off. 7.Price up to 5 tr. 8. The most important advantage is the power consumption, any electrical wiring will withstand this device when working without problems - 10 A machines, even at full power, do not turn off, the device and wires do not heat up. (plugs turned off only when cutting metal with an electrode - there the current is more than 10 A).
Disadvantages:
the power is clearly overestimated by the manufacturer, in fact, no more than 160 A. the appearance is like a toy, and the dimensions are the same - not a drawback, but just a first impression - I could not believe that this miracle could cook metal. complete wires are rare g .. - short and aluminum (like on resant, they say it's the same resant ...), but for the first time it will go.
Comment:
excellent device, versatile and very mobile, the best option for home, worth the price.
May 6, 2017, Borovichi
Advantages:
Price (5600). Brews softly. 3rd for 5+.
Disadvantages:
noisy fan. the cooler grill is located low, sucking in debris.
Comment:
Pulls from 200V through an extension cord 25m, cable for the holder 6m, weight 4m.
11 August 2016, Voronezh
Advantages:
Decent price, easy ignition of the electric arc, serviceability (according to the master in the service center)
Disadvantages:
There are no disadvantages. A high-speed fan, therefore, noisy, although this does not interfere during welding.
Comment:
The filling of this device is analogous to "resanta", but at a cheaper price. I have been using it for several months, no complaints. Arc ignition is soft. Compared to the old device (techno weld) which burned out after 7 years of operation, it is much easier to work with it. For home use it is enough, so I recommend it to everyone.
June 16, 2015, Nizhny Novgorod
Advantages:
-Lightweight, compact - Convenient power key. - Doesn't heat up. - Cooks with a troika without problems. The four also pulls normally.
Disadvantages:
Length of welding cables.
Comment:
My first inverter. It looks like a toy, but it works great, no complaints. The length of the cables (no more than a meter each) is, of course, upsetting. But if you hang the inverter through the strap, then it seems like enough.
July 26, 2017, Moscow
Advantages:
small, light, a triple cooks with a bang at 100A, even though the passport says that the triple is the maximum electrode. I think 4 will be easy too. The electrodes are lit at a time, in short, an excellent device for the garage.
Disadvantages:
Have not found.
Comment:
12 June 2017
Advantages:
compactness, light weight, price .... !!!
Disadvantages:
minus - only one, short wires (but this can be solved)
Comment:
I took this welding in a store, I was surprised at its compactness, after - having received an explanation, I conducted a test - and went to my friend's work to check this Eurolux IWM-190 Welding Inverter, it actually cooks and burns (that is, it cuts metal if necessary) 5mm electrode - although the size of an apparatus is the size of a toy ... Thank you for such a separation with this welding - she even surprised a real professional welder with her size and such work ... The electrodes do not stick, cooks well - I myself did not believe that this could be. This is a really cool machine .....
September 4, 2016, Moscow
Advantages:
Lightweight, small, good price
Comment:
the welder is the most for the house, dacha. I built a house on screw piles, I welded the piles myself with Welding Eurolux IWM-190 and I was surprised that, while cooking without interruption in the house, the light did not turn off, the welder did not turn off although it was cooking with four electrodes. In general, as a welder, I really liked this welding
June 3, 2017, Kurgan
Advantages:
pulls well, the 3rd cook at 100 A, the current is stronger, it sprinkles, 4 will pull, I think, is compact.
Disadvantages:
short wires
Comment:
good for this money! after grandfather's welder, which 2 barely carry and the current is 140 and does not pull 3, as on this inverter 80 a)) God's gift
15 July 2017
Advantages:
This is the 21st century. Super! It pulls out even at a voltage of 140 volts - this is the very thing in the country! Easy, cooks 3rd with a bang !!! The seam is smooth and durable !!!
Disadvantages:
Yes, in general, no, except that "the negative wire would be more authentic ..
Comment:
I bought it on Power.ru, I could not experience it for a long time - it rained ... And now the sun, Hurray! Operation has begun! This kid will give odds to professional welding machines - lightweight, not felt on the shoulder, cooks great !!! The seam is smooth, unpretentious to stress. The only thing - keep in mind - the quality of the electrodes is different, and the voltage in the network is also different, so before you cook "for finishing", try different modes of current strength.
June 8, 2017, Alexandrov
