Svarog REAL CUT 45 (L207)

Short review
Svarog REAL CUT 45 (L207)
Selected in the rating
10
Best rating welding machines
Plasma cutting - For summer cottages - For home - For pipes - Inverter
Back to rating
Share

Buy Svarog REAL CUT 45 (L207)

Characteristics of Svarog REAL CUT 45 (L207)

Yandex.Market data
Main characteristics
Device type inverter for plasma cutting
Arc ignition type high frequency
Workflow type air
Machine type manual
Control manual
Duty cycle at max. current 60 %
Max. welding current in continuous operation 30 A
Current type high frequency current
Cutting current 20-45 A
Power 6.2 kVA
Open circuit voltage 310 in
Input voltage 160-270V
Number of supply phases at the input 1
Frequency 50 Hz
Metal thickness 12 mm
Air flow 100 l / min
Air pressure 4 bar
Cooling type aerial
Efficiency 85 %
Device class semi-professional
additional characteristics
Degree of protection IP21S
Insulation class F
Dimensions (LxWxH) 470x155x315 mm
Weight 8 kg
Operating temperature 40 m / min
Equipment plasma cutter; cable with grounding terminal;

Reviews about Svarog REAL CUT 45 (L207)

Yandex.Market data
Rating: 5 out of 5
Anton Sheikov
Advantages: The cheapest device with high-frequency ignition with decent quality. Good cut, small dimensions, lightweight.
Disadvantages: Not yet revealed.
Comment: It is better to put more pressure. Initially set 0.4. Yes, and during operation there was a drop in pressure - 2 nozzles were screwed up. At higher pressure, everything is super.
May 18, 2017, Nizhny Novgorod
Rating: 5 out of 5
Nikita Amchentsev
Advantages: Neat cut, fast cuts, economical
Disadvantages: No
Comment: I work with such a copy in my shop and I must admit that he deserves respect. Sheets of iron centimeter cuts simply effortlessly. The edge after scale failure is neat, without torn areas. He worked with alloy steel, bronze, and aluminum (6mm). On reliability, no questions asked, a trouble-free machine. The arc ignites easily, there is a pressure gauge to control the working pressure.
September 21, 2018, Moscow
Rating: 5 out of 5
Victor Danov
Advantages: Powerful, affordable price, pressure gauge
Disadvantages: Absent
Comment: I took it for a while. Cut an old refrigerated container into pieces. I had to sweat, but the plasma cutter never let me down. Thin metal cuts quickly, there were difficulties when working with a thick-walled bed, but Svarog coped. The terminals and cables are solid, the arc is ignited without difficulty, the cutter is comfortable - the hand does not get tired. There is a current adjustment and a pressure gauge. He worked all day, but the block failed to overheat. Cooling is quite efficient and quiet.
September 23, 2018, Moscow
Rating: 5 out of 5
Leonid Makarov
Advantages: Good cut
Disadvantages: no target audience
Comment: Two such devices were purchased for metal reception. Handles cutting of non-ferrous metals and steel without any problems. It's not a pity to kill a metal case, there is a pressure gauge, nothing dangles or creaks anywhere. Cuts 6 hours a day, normal flight
28 August 2016, Moscow
Rating: 5 out of 5
Maxim Lavrenov
Advantages: Low voltage operation, sturdy body, carrying handle, air pressure indicator
Disadvantages: No
Comment: I was seduced by a low price and this time I was lucky. Nested bablishko, this plasma cutter from Svarog worked 100%. Now I'm even afraid to imagine how many tons of metal we cut on our "tin". Cuts car bodies and old containers like paper. I advise you to put more pressure on thick workpieces. Consumables for the cutter in stores are easy.
September 27, 2018, Moscow
Rating: 5 out of 5
Alexander Murashkin
Advantages: Compact, handy, lightweight
Disadvantages: No way to cut the rail
Comment: Ideal for working with metal up to 1 cm. If you need to cut thick reinforcement or rail, then you need to take something more powerful. It worked with both rough and non-ferrous metals, the device did not fail anywhere. One of my last projects was a stainless steel brazier. The blanks were cut from 6mm thick sheets. I liked the neat edge, the cutting speed is also excellent. I noticed one moment - if the metal is painted in several layers, then the arc is not excited the first time. In order not to fool my head once again, I do a preliminary stripping at the cutting site.
September 25, 2018, Moscow
Rating: 5 out of 5
Albert Yustov
Advantages: Withstands the most severe loads, you can work in dusty conditions, good cooling.
Disadvantages: Like all plasma cutters, it is picky about air quality.
Comment: Wherever this plasma cutter has not been with me ... at a construction site, and in a dirty metal workshop of my friend, and even an old camp site was cut into metal! Dirt, dust, heat ... people could not stand it, but this one cuts and cuts everything. The cutter is convenient, lightweight, powerful arc, so any metal cuts very quickly.
September 30, 2018, Moscow

Electronics

Office

Appliances