RESANTA SAI-220
Short review
Selected in the rating
10
Best rating
welding machines
Manual arc welding - For summer cottages - For home - For pipes - Inverter
Buy RESANTA SAI-220
Characteristics of RESANT SAI-220
Yandex.Market data
| Main characteristics | |
| Device type | welding inverter |
| Welding types | manual arc welding (MMA) |
| Welding current (MMA) | 10-220 A |
| Input voltage | 140-260V |
| Number of supply phases | 1 |
| Open circuit voltage | 80 in |
| Output current type | constant |
| Duration of inclusion at maximum current | 70 % |
| Electrode diameter | 5 mm |
| additional characteristics | |
| Anti-adhesion | there is |
| Hot start | there is |
| Degree of protection | IP21 |
| Weight | 5 Kg |
| Equipment | cable with electrode holder; cable with ground terminal |
Reviews about RESANTA SAI-220
Yandex.Market data
Advantages:
I liked the quality of welding ++++. The arc burns smoothly, ignites without problems. Used mainly electrodes MR-3 and OK-46. Also SSSI, I don't remember exactly which ones. I tried different ones on nerzhe, norms. In general, only positive emotions.
Disadvantages:
The only negative is the short wires for the holder and ground. I connected them together on a twist with a solder and use it as a ground wire, and I bought a 4 meter cable for the holder. The clamp of the mass burnt out over time, replaced with a solid brass one. And the holder was surprised - did not expect that it would work for a long time. However, it works, does not burn.
Comment:
I got it about four years ago. I took 220 to have a large power reserve. Extension cord 100 meters - normal flight. Main electrodes, 3, 4 OK-46. I cut with 5th Mr-coy (there were no others at that moment at hand). I use it in construction, in the garage. I did not regret the choice, if I bought it now, I would buy the same one again.
April 10, 2018, Tomsk
Advantages:
An inexpensive welding machine, the weight is just ridiculous, even without studying to be a welder, you can cook without problems. We bought to work for welding a ground loop. I work as an electrician by training. I boil the contours with this machine. The seam is even, welds 20 mm reinforcement perfectly. I tried to cook the pallet protection on viburnum, everything is super, never burned through, although the welder is self-taught.
Disadvantages:
I don’t know if
Comment:
Excellent machine, cooks for 5+ I recommend to buy
March 1, 2018, Kostroma
Advantages:
Fast and quality welding
Comment:
Two years ago, my car broke down, the bottom rotted, but there was no welding machine and I decided to order it. I welded very quickly, in 3 days, there were no problems with the voltage. I liked the quality of welding.
1 March 2018, Moscow
Advantages:
Continuous work for a long time. Excellent ignition of the electrode. Good weld seam
Disadvantages:
no
Comment:
I got this unit for home. All that needed to be brewed or grabbed was brewed and grabbed long ago. In general, it is worth taking and worth the money.
16 March 2017
Advantages:
Light weight and dimensions are not large, the seam is obtained even with low voltage in the network.
Disadvantages:
I haven't found it yet.
Comment:
My previous inverter burned out and I had to buy a new one, after reading reviews on the Internet I bought it and did not regret it, now I cook and I am glad that it happened and I didn’t know that there are such cool welding machines.
19 March 2017
Advantages:
Lightweight, small, looks beautiful, powerful - I did not even set it to full when working
Disadvantages:
while everything suits
Comment:
I have little experience with the welding machine, but still I liked the model, weld and that's it, the quality of the seam depends only on you. The device is light, sparks do not fly in different directions. It is a good model for home, it is compact - it has been removed from the case and takes up little space, plus there is a belt on the device itself.
July 7, 2018, Irkutsk
Advantages:
Excellent value for money and quality. Lightweight, compact.
Disadvantages:
Lack of storage case.
Comment:
We have been using this device for more than four years, the device does not overheat, it pulls 5ku electrodes, but I cook 3 or 4 myself. The current mode control is adequate. Great helper for home and work. How many they have already cooked and cannot remember. Completely satisfied with the purchase, I advise everyone.
December 25, 2015, Chkalovsk
Advantages:
Compact, powerful, quite suitable for a beginner
Disadvantages:
Short cables
Comment:
Was taken for household needs and training. For a beginner without experience (knowing only the theory), it was not worthwhile to figure it out and
January 27, 2018, Lipetsk
Advantages:
I didn’t pick up a hold for 8 years, bought this device for construction yesterday and decided to try it in the garage. I found the old electrode 3, caught the arc the first time and welded 2 pieces of 45 angle with an even seam. I used to cook on VDM from the post, this one lays down metal much better.
Disadvantages:
Short cables + and -
Comment:
Great thing, worth the money.
14 March 2017
Advantages:
Price-quality ratio. It never happened to overheat, so that the welding would turn off.
Disadvantages:
1 Too light rotation of the amperage adjustment knob, everything has gotten off a bit 2 The scale on the adjustment knob to adjust the amperage is not correctly applied 3 Fan material is too weak: a small leaf of grass has fallen and it scattered into small parts 4 Unsuccessful design of the ground wire. but these are all little things. excellent machine. I advise everyone.
Comment:
in operation for more than 3 years. no complaints
September 10, 2015, Buzuluk
