Interskol DSh-10 / 260E2

Advantages: Inexpensive. Qualitatively. Convenient.

Disadvantages: I haven't noticed yet.

Comment: For its price it works with a bang, had in the past 3 screwdrivers from other firms and I can say that this one arranged more. Powerful, convenient, easy to operate. Most importantly, you don't have to worry about batteries. This shurik did not find analogs ... or they simply do not exist))). For home - the best and most reliable assistant. I recommend everyone to buy this unit.

Advantages: comfortable, lightweight, with a ratchet at the tightening torque, a lot of speeds

Disadvantages: Heats up during operation, did not find others

Comment: Arranged for absolutely everyone! Starting from the fact that you do not need to think about charging batteries and ending with convenience. Justified all imaginable and unthinkable expectations for the price. In my opinion, this screwdriver has no analogues at all, or very few. You can set the tightening torque. At first, I was embarrassed by the chuck without spindle blocking, but thanks to the reverse, everything changes by one or two. And the engine holds quite tightly ... The rubber grip, the easy switch to reverse, the absence of the shock mode, I consider a plus. You can forget about batteries

Advantages: Low price, the presence of a ratchet for setting the tightening torque, no expensive battery, two speeds, start from scratch

Disadvantages: Heats up quickly and begins to smell like burning winding. Somehow the brushes sometimes sparkle strongly. Short wire. No backlight. In general, I had a battery shura of the same company DA10-18ER. I worked for them at home during the repair for month 3. During this time I did everything successfully and realized that I no longer need it, because the batteries do not last long anyway. And since it was still necessary to drill and twist the furniture sometimes, it was necessary to find a replacement for the wired one. As a result, I went through the entire Yandex market, and was surprised by the absence of this niche. It turns out that almost no one does them.

Comment: Not many options came out of everything: Interskol, Hammer, Enkor, Assault, Makita. After scrolling through the Internet for a couple of days on all sorts of reviews, and tests I chose a shock Makita. I ordered one in the store, came and looked at it and realized that it was not that ... in general, there is no rattle there, and therefore it is not suitable for home use! I had to continue looking for a shura with a ratchet. They also offered to see a hummer. Honestly, it did not immediately lie to him, I decided to read about him at home. I got home and read it. One negative about breakdowns. So there was little time left (the battery shura had already been sold and a replacement was needed).So I chose Interskol, because they are more or less with the service, and the reviews with the tests are good. I bought it for 1280r if I'm not mistaken. Brought home and let's test. He held it in his hand, sits normally, moderately heavy. Tightened a couple of screws 100mm, turns easily. Later I had to disassemble the cabinet, which was assembled with screws alone (I counted about 200 pieces). So I took it apart in an hour! I did not believe it myself, but at the second speed the screws were unscrewed in a second. During this time, he certainly warmed up decently, but you could hold it in your hands. In general, he was baptized perfectly. I also tried to drill, drills without any problems. Mixed plaster with a mixer attachment. The floor of the bucket kneads in a stretch, but still kneads. According to the description, the weight is 1.4kg. Weighed on household kitchen scales: without wire 1.2 kg with wire 1.35 kg. I think later I need to disassemble, look at the brushes, lubricate the gearbox, and it is possible to install an LED for illumination in the handle. In general, I recommend buying if you need a compact and inexpensive drill with the function of a screwdriver for household work. If you have any questions, write to pashtat@mail.ru

Advantages: Price, power, lightweight, good build, soft cord.

Disadvantages: Short cord, a lot of marriage (read in the comments)

Comment: When buying, I went through 4 pieces until I found what I needed, or the cartridge dangles or the torque adjustment is inadequate. I found what I wanted, the device only pleases with a powerful, excellent adjustment of effort, in the hand like a cast. For those looking for a spindle brake, I suggest looking at the price tag first. When buying, I advise you to check the backlash cartridge and it is very easy to identify poor adjustment, even for an inexperienced person

Advantages: Powerful, inexpensive, lightweight, 2 gears

Disadvantages: For little things like the cord is short, so these are frivolous nitpicking

Comment: Habit is a big deal. I'm used to cordless screwdrivers. After the death of my Hitachik's cans, I had to think - either to change habits, or to sit without work, because the cost of Akum is commensurate with the price of a power drill. I bought a network one. The first days I hooked on the wire, muttered, and then calmed down, because there are more advantages than minor inconveniences. Power. Works with all fasteners for wood, roofing and metal. Drills the same materials. There are two speeds. The switch is good, clear. The cartridge without a single comment, like the clutch. The moment is enough. In the heat of the moment I wanted to add a cord of 4 meters, and then I thought, but why? Extension cords have not been canceled. Left as is 2 meters. This is not the point. The bottom line is that for this money (2900) I got a normal working screwdriver.

Advantages: adequate price, but generally a normal machine

Disadvantages: probably someone would have found it, I'm not picky

Comment: I bought it a month ago. I made a garage for two cars from a professional sheet. I took out the cordless drill due to constant recharging, because the profiled sheet was used for the roofs of industrial buildings. The screws are long, the timber is strong. I tried it with an ordinary drill, whatever you say, then the initial speed is high, then the constriction of the self-tapping screw. The search for a power screwdriver led to an inexpensive DSh-10 / 260E2 (Interskol). I bought it for 1280 rubles. I don’t know for whom the cord is short, mine was 253 mm long. thin cord, rubber sheath, what else is needed. True, I had to design the clip myself, hang it on my pants, jacket. This is most likely the main drawback. Everything else works more than decently. The speed starts from zero, the tightening torque works for any self-tapping screw. For the sake of checking the operation of the tool, several times I screwed and unscrewed screws with a head of 12 and 18 cm long (into a bar) without drilling. Copes on mode 15 (total 20). According to the mind, for such screws the place must be drilled. But as we all know foolishly you can and ..... break. There was no burning smell.So the garage is standing, the tool is lying, waiting for the next job. It may not stand up to everyday work, but it is quite a normal tool for the home.

Advantages: Very handy, lightweight and powerful cordless screwdriver. Nice to hold in hand. Takes up little space. Well built. Self-tapping screws, confirmations drive perfectly. Cheap.

Disadvantages: No spindle lock, unfortunately. The cord is only two meters long. Unlike battery analogs (for example, DA-18ER), it heats up a little under severe loads. Although for such a price, the disadvantages are not noticed.

Comment: I bought it for 1270 rubles. one of the first. I took it for use only as a screwdriver, since I have a drill. Sellers say they are snapping it up with a bang. No wonder it is very user-friendly and powerful! True, I do not know if it can be used professionally with heavy loads (in the sense of 8 hours a day and 2000 screws per shift), but for household work it will become an indispensable and reliable assistant. In general, I recommend it, a good tool.

Advantages: There are a lot of advantages. The price for this quality is simply pErsik!

Disadvantages: Sorry, there is nothing to say

Comment: I have had a drill for a long time, but I decided to write a review. This is not the first interskol I have, I usually watch the action in chain stores and take their tool for myself. I took this in 15 for 1800r (!). In a nutshell: the drill is very tenacious, efficient and indestructible. Lightweight, comfortable, the body is made in such a way that the weight is not felt at all even with serial drilling. The tightening of the clutch works quite clearly, the selection here is as much as 20 marks! The force is up to 35 Nm, and they are definitely there, if not more, and when the network is in order, then it whistles driving the fasteners. In short, so as not to spread the thought - I recommend this drill from the heart. For the sake of sports interest, you can certainly look for a cheaper one, although in truth, even the average price tag in any store is not high for its quality.

Advantages: resourceful, comfortable, hard-working, not fragile

Disadvantages: short cables

Comment: Finally, someone has a normal technique. In short, we make custom-made furniture and on assembly tables we are just doing the assembly of some fittings. Previously, we used battery-powered screwdrivers. And then they saw the skill network - it just comes out more conveniently for us, because the table has a socket. We took several pieces, and they all flew out in six months, there is some kind of plastic gear. And they say, Th for garbage, in my store it's the same type of household appliances. But what's the difference it's a screwdriver, don't care if everyday life is not. And after that they took these interskols. We immediately looked at the spare parts, asked the service technicians what how, they say everything is done there, you can take it. Well, they took it first for a test, then we stocked up a shop for 4 tables. Now they have already begun to slowly end up on some skins, in general they have worked quite enough. In short, right now, even buying a pair of scoops is not a problem for interskols, And in the services it is not clear whether there are skills for skills Well, the drills are working now, but there is still no work done with the scoops, I don’t know yet. But I think everything will be fine. And this model can normally be taken, although it is single-speed, but it is the same for us in terms of speed. We only put other cables at once through the service, there is a friend there with a guarantee, that is, we do not fly off. And so take it, of course, they serve with us

Advantages: High-quality assembly, inexpensive, powerful, comfortable grip, smooth adjustment by the trigger, two-sleeve chuck, torque clutch

Disadvantages: You need to work with an extension cord, the native cord is short

Comment: Satisfied with the drill, bought "blindly" several years ago. I just turned it over in my hands, pulled the trigger, twisted the ratchet. I had a drill in my hand. I write "drill", but I myself think that I do not drill holes with it very often, although she copes with this matter as well as screwing in fasteners. For what, in fact, it was taken. The engine has enough power for drilling, so to tighten the screws, you need to use the clutch, setting the torque limiter to any desired division. There is no spindle lock, but at 1 speed the tool change takes seconds. Self-tapping screws up to 8 mm can be screwed in without additional drilling. No heating was noticed during serial screwing. For two years, there have been no comments on operation, although I work with them often. The indicator is a rubber handle, which I have already rubbed with a calloused hand.