PATRIOT FS 300

Advantages: Excellent ergonomics and appearance - pleasant to hold in your hands. Powerful. In appearance, it is assembled with sufficient quality.

Disadvantages: Short power cord. The dull cartridge is a two-sleeve, small, unsuccessful shape. It is easier to rub the blisters than to grip a cylindrical drill bit properly. However, this applies to all instruments of this class, without exception, presented on the Russian market [see. comment]

Comment: I am professionally engaged in the installation of engineering systems - electrical installation, plumbing. I often help my friends / acquaintances with the assembly of furniture and all kinds of construction work. My first power screwdriver with a ratchet was SKIL 6222. Then I found my ideal - the Status SD500. The only (!!) device of this class with a normal cartridge, which could be twisted with two hands without using the trigger. Unfortunately, the manufacturer changed the line and in the new version the cartridge became as dull as everyone else's. I decided to try something new - the choice fell on the Patriot. Quite powerful for its size and weight. He pulled wooden blocks to concrete with frame anchors - to the limit. Self-tapping screws up to 5mm in pine and board materials (chipboard, plywood) - no problem. Assembly of furniture and work with drywall - with a bang. She can drill 1-3mm sheet metal, but not so much fun. Gave 3 more of the same friends. They finished the balcony with one and continue to spill the apartment. The second one at the firm assembles server racks and raskurochivaet sistemniki. The third is lying on the shelf and waiting in the wings :) So far, everyone is happy. At the beginning of 2016, this is {in my humble opinion} the best instrument in its class, taking into account the price of 2000+ rubles.

Advantages: 1. Price 2. Good workmanship 3. Powerful 3. Lightweight 4. Fits comfortably in the hand

Disadvantages: 1. The cartridge, after releasing the trigger, continues to rotate slightly by inertia.

Comment: A good cordless screwdriver. I took it in addition to the battery. Powerful enough, and most importantly, suitable for prolonged power work. In place for a pair of self-tapping screws and when I am too lazy to charge the battery, I use it, but if you need to climb somewhere, then, of course, you cannot do without a battery. I specially took this model with a short cord, I don't need a long cord, since there is a cordless screwdriver.

Advantages: Power, price, convenience.

Disadvantages: No.

Comment: For relatively little money, I got a very good and powerful tool. Over the long period of using cordless screwdrivers, I decided that there is nothing better for home needs than a network one. The choice fell on the fs 300, at 300W it has 35Hm, which together gives a fairly powerful screwdriver plus a very resourceful drill. In drill mode at 2 speeds, it will be quite possible to polish small parts. I am more than satisfied with the purchase, operation under repair conditions has shown the high reliability of this shura.

Advantages: Powerful

Disadvantages: Not yet. The weight in the description on the sites is 1.2, and on the box I have 1.4 kg. The instructions indicate that the brushes are included, but they are not in the box (everything was sealed)

Comment: I just bought it, it seems that the speed in first gear is too big, but this is subjective.

Advantages: The price is quite adequate; Build quality (in appearance and tactile) is good; Two honest (mechanical) speeds; Sufficient power (see below); Light weight; The range of "break" force selection is wide; The cable is good, flexible and long;

Disadvantages: I would like to reduce the noise. True, this is a derivative of power ... The wind from the cooling system can raise a dust storm :) The balance of a screwdriver is somewhat unusual after a cordless tool. (This is not about a specific model, but in general) There is no suitcase included. The kit would be more expensive, but the suitcase is useful.

Comment: The tool was bought to work in the country, instead of stolen Makita tools :( The operating mode is the most country one (weekends / 4 hours per day / 10 minutes you drill and screw in / 10 minutes with another tool). Accordingly, the tool practically does not heat up ... For work on wood and plastic, the power is enough for all cases. Even for drilling with nibs, if without fanaticism. Perhaps, when working with metals, there will be some power shortage. Drilling holes in metal plates of 1.5 mm does not cause problems. The screwdriver is light enough , the work "from the bottom up" is not very tiring. The drill runout was not observed, the assembly of the tool is accurate.

Advantages: 1 price 2 torque 3 two speeds

Disadvantages: well guys, for such a price ... well, they are not

Comment: 1500r is definitely worth it !!!

works fine so far. no complaints.

Advantages: works

Disadvantages: not found

Comment: powerful enough

Advantages: Fits comfortably in the hand. Good power, weave turns without problems, drives into the board. The ratchet works adequately. 2 speeds, you can drill and twist screws. The cord is of sufficient length.

Disadvantages: A bit heavy, out of habit. Weight distribution is not screwdriver.

Comment: Take it, you won't regret it!