Interskol P-22 / 620ER
Short review
Selected in the rating
9
Best rating
perforators
Power: up to 800 W - Mains operation - Horizontal - For home
Buy Interskol P-22 / 620ER
Characteristics Interskol P-22 / 620ER
Yandex.Market data
| General characteristics | |
| Drill / drill attachment type | SDS-Plus |
| Number of working speeds | 1 |
| Power consumption | 620 Wt |
| Max. idle speed | 1100 rpm |
| Max. impact frequency | 5060 bpm |
| Max. impact energy | 2.2 J |
| Max. drilling diameter (concrete) | 22 mm |
| Food | from the network |
| Features and capabilities | |
| Operating modes | drilling |
| Screwdriver | there is |
| Capabilities | reverse, safety clutch, electronic speed control |
| Additional Information | |
| Gadgets | additional handle, power button lock |
| Weight | 2.82 kg |
Reviews about Interskol P-22 / 620ER
Yandex.Market data
Advantages:
1. This is Interskol 2. He quite well drills walls in concrete walls even with Chinese drills. 3. The set includes a suitcase 4. The price / quality ratio is excellent
Disadvantages:
1. This is Interskol, not Makita. 2. The suitcase is bad, despite its solid size it is impossible to accommodate drills or a tube of lubricant for them.
Comment:
I took it as a replacement for an impact drill, in this capacity it is a miracle as good, my very problematic concrete walls with granite crushed stone holes without problems. I don't think this model is suitable for professional use, but at home it will survive more than one major overhaul.
June 5, 2011
Advantages:
I work for them all the time. work like that. 40-50 holes for dowels a day, no question, regardless of the wall. Handles a long drill (500 mm) without problems. A 25 cm concrete panel with granite chips "went through" five times like clockwork in 14 minutes. The value for money is excellent.
Disadvantages:
The plastic and the comfort of the handles leave much to be desired. The cord is too thick.
Comment:
In terms of performance I can quite compare with "Makitos", in terms of external performance and convenience, no. And yet, if you work "on impact", especially in not very strong walls, I advise you to switch to drilling closer to the "exit" or turn off the speed, otherwise, even with a diameter of 6 mm. the departure of a piece of the wall is ensured.
22 Aug 2012
Advantages:
Price-quality. Case, good work.
Disadvantages:
The case is a little too small, it is inconvenient to place even the cord, which by the way is long, which can be attributed to the pluses.
Comment:
I bought it in March when the room was being renovated. I hung up the chandelier, attached the baseboards, hung a bunch of shelves, hung the clock. The house is blocky, before the puncher tried to make a decker with a hammer drill, spent an hour on 1 hole. As an amateur, it is convenient for me that he is always in his briefcase and drills the walls with a bang. If you, like me, need it several times a month, feel free to take it. There is no point in overpaying for the brand!
17 September 2012
Advantages:
* well drills and drills, the concrete wall, which a simple hammer drill could not pierce, gave in with a bang. * there is a case
Disadvantages:
* strong smell of phenol from the case and the punch, it is clear that they saved on plastic. in comparison with the existing interskol, but Russian assemblies, a screwdriver and a drill, plastic is worse
Comment:
good model for home renovation
June 27, 2011
Advantages:
Unkillable. I went through two repairs. He drilled about 2000 holes in concrete and brick and about 800 in all kinds of metals and aluminum. In concrete and kerpich, it goes into oil.
Disadvantages:
A bit heavy. And the weak point is the button on which the speed control knob. The first time I flew still under warranty, I was replaced for free. The second time flew after 2 years, had to be changed for money. I paid for the replacement - 500 rubles and two days of downtime.
Comment:
The puncher is good. Ideal for household needs. Price-quality ratio is commensurate. It is difficult to say about the smell of the case and the perf, since I bought it for drilling and drilling, not for sniffing.
January 17, 2015, Novosibirsk
Advantages:
Normal price tag, powerful enough and easy-to-use perf
Disadvantages:
the case is too compact
Comment:
I bought a perf after several unsuccessful attempts to drill concrete with a hammer drill. Although there were not so many holes for the dowels, I decided to take a puncher so that I would not always run to my neighbor for the tool. I chose that it was inexpensive and had enough relics for drilling concrete. For my tasks, perf is just perfect. I work with 6-10 mm drills. No problem: the holes beats clearly and quickly, the vibration is small, the heating is within the bounds of decency.
December 11, 2016, Moscow
Advantages:
Compact, lightweight, powerful
Disadvantages:
Only two modes
Comment:
My only complaint is the lack of a pure chiseling mode. On the other hand, there is already a heavy perforation, and instead of a hammer drill, it is better suited for light work. Therefore, his main job is to drill walls (and it does not matter to him what kind of brick, aerated concrete, cinder block or monolithic concrete). Dowel holes - 8mm - literally seconds. For anchors - 12 mm - a little more, for sockets and boxes - it copes with a crown without problems. For solid fasteners or through holes there is another device, we don't use this one. For two years (it will knock soon) no questions arose.
July 17, 2016, Moscow
Advantages:
Light weight for household purposes just right. Not a strong sound of work. Quite good ratio of price, quality and power. Ability to work as a screwdriver. Long cord. Case included. The service is adjusted.
Disadvantages:
Rough plastic. Thick power cord. There is a slight smell from the plastic of the case.
Comment:
I am repairing an apartment, I took it in addition to a drill that does not take concrete (she is already 25 years old, Rostov). He worked on concrete (ceiling) with a 6, 10, 18 mm drill - the punch coped with it. Before him I rented Makita 2470 of course the difference is felt, but not critical, it is 2 times cheaper. When buying, I asked for an adapter for a bit, took an Interskol network screwdriver and a Bosh screwdriver from a friend. So the puncher works softer than the Interskol screwdriver and it is easier to control the twist on it. Certainly not Bosh.
September 27, 2011
Advantages:
price-quality, compact, lightweight, cartridge
Disadvantages:
no clean swotting
Comment:
This device was purchased to riddled the walls in a new panel three-ruble note. And in the holes, respectively, hammer anchors with dowels for hanging all kinds of cabinets, lamps, paintings, etc. Kind people suggested that it is better to perforate our concrete with a perforator, a drill with a blow will stretch this dubious pleasure for too long. As a result, I chose this particular model: reasonable price, not too heavy, powerful enough, it can just serve as a drill - just put on the drill chuck instead of the SDS axle box. If you clamp bits into such a cartridge, you get a normal screwdriver, a bit heavy, really.I liked the additional rubberized handle, without it it would be difficult to hold the tool while drilling. It's nice that it can be fixed in any position. By the way, the drill chuck is very convenient. The suitcase is convenient enough for storage and transportation. In general, it is good for household needs, but there is a feeling that it will cope with more stressful tasks.
November 30, 2015
Advantages:
Nice to work with, the speed controller is adequate - you can twist the screws too.Long thick cord, you are not afraid to break
Disadvantages:
A cartridge with a key, for the thickness of the cord you have to pay with the complexity of packing in a chumodan. Doesn't hit without spin, really never needed to
Comment:
Satisfied. Year of use
25 June 2015
