RYOBI R18JS

Advantages: Saws quickly, easily and smoothly, illuminated cutting area, no wires. Convenient file replacement. Separate speed control.

Disadvantages: The speed control is not linear - at some point it starts to "fry" to the fullest. No RPM control under load - plugs up easily at low speed.

Comment: I can subjectively compare it with a jigsaw from Hitachi, I will single out 2 points: - Ryobi has a distinct pendulum work. At max. performance bites into a tree with tremendous force. - Smooth drank. Hitachi, no matter how hard I tried, gave out a wave, Ryobi's cut was much smoother. I took with a battery 4 a / h. It took about 25D0? Rows to cut a 4 cm thick worktop (3 out of 4 divisions remained). The cutting length was ~ 2.7-3.0 meters. Those. one charge would be enough for 10-12 meters of cutting. This roughly corresponds to the declared characteristics (80 cuts of 50x100 boards)

Advantages: Build quality Saws easily Pendulum presence Backlight No wires

Disadvantages: I came across a model with a curved file guide (there is a support wheel on it). When installing the file, it, along its length, deviated from the perpendicular axis by 2-3 mm. Everything was decided in a couple of minutes by installing the washer.

Comment: Great jigsaw! Saws easily and quickly. Quiet. Conveniently, the speed of the blade is adjusted separately, and not by pressing the start button - when working with the same material, you do not need to "catch" the speed by pressing every time - set it once and drank. If necessary, you can also change it during the sawing process - with your thumb. For a small amount of work, an irreplaceable thing, although if you change the batteries, it can easily cope with any volume.

Advantages: 1. Sufficient power (approximately 650 watts), the manufacturer in the technical characteristics indicated the ability to make a cut with a thickness of 101 mm, which was tested by practice when cutting a beam of 100 by 100 mm. High power and a sharp saw allows you to make such cuts and even more in thickness without fear But with such a load, due to the high current consumption of the jigsaw, you need to use batteries with a capacity of 4-5 Ah, they contain 10 pieces of lithium batteries, which in total will allow you to remove current up to 30 amperes. For each battery, 15 amperes. use 2.5 Ah batteries (5 pcs), then such currents will quickly drain the batteries and the wear of the cells will increase. 2.mobility the ability to use Jigsaw where there is no electricity.3.adjustment of revolutions with a separate slider at the top of the handle. Allows you to set the required speed for your type of work and not return to this moment making one type of cut in succession. The start button only starts the engine. It has a fixation. During work, the slider does not move from vibration. 4. the ability to quickly replace the file without a key. (In the future, this point turned out to be a minus for me, because the structure of the saw attachment does not allow fixing any file in the same vertical plane and therefore, when stationary installed on the saw table upside down with a file, will not allow to get an even cut material, there will always be a slight turn of the Saw along the axis. Each Saw will have this angle slightly different. 5. Sufficiently adequate mode of operation of saw blade blasting with a roller. Has 4 positions. In the first position of the saw blade (pendulum) there is no file. It is used for cutting metal and finishing cuts. For example, wood chipboard. In other positions, there is an undermining on increasing. The supporting roller The saws move in a horizontal plane forcing the file to bite into the material, making the cut faster but less clean. At position 0, without undermining, the angle between the file and the sole is 90 degrees. When undermining, the angle changes, the roller deviates back. 6-9 point see feedback

Disadvantages: Minuses. 1. Saw attachment system - for those who want to use the Jigsaw for some finishing cuts it will be a hindrance. I had to buy another Jigsaw for finishing cuts of wood chipboard with a fastening system plane - plane of the saw - plane of the clamp screw. And with a system for maintaining the file in croutons on the sole. Longer but without distortion. Also, the plastic clip of the Saw that closes the spring can burst (which happened to me through my fault), but this part made of plastic does not inspire optimism in the future and may collapse over time from fatigue. You can only replace the stem assembly. The cost of the stem is 1250 r. plus work. I solved the problem of a broken cover, see photo Also, an additional spring was provided with additional clamping of the saw, which positively affected its fixation, providing a slightly smoother cut. 2. when installing the file at 90 degrees relative to the sole, I had to push the sole out of the grooves, which should be exactly 90 degrees. You can fix it - expand it with a file. But by default it is crooked. 3. there is no blowing off of sawdust from the cutting area. 4. there is no control over the revolutions when the load increases, you have to increase the speed with the slider.

Comment: Hello. I want to share my experience of operating the Ryibi R18js cordless jigsaw. Several years ago I decided to buy several Ryobi tools from the one + series line, including the cordless jigsaw. I bought it for construction work in the country, at home. The choice was made in favor of Ryobi due to the relatively low prices for the tool line, charging and batteries and the decent quality of the tool. Advantages identified during the period 6.Convenient handle, when working, the thumb can increase the cutting speed with the slider ... 7. Illumination 8. Possibility of installing long saws with a thick shank (the saw shank has different thicknesses depending on the manufacturer and the length of the saw) 9. Not afraid of sawdust and wood dust. He stood in the table with a file and successfully transferred mountains of sawdust falling on it. round shape also transferred dust and sawdust. Backlash did not increase. In general, Lobzik is good, it will cope with most tasks. I use it with homemade 5 Ah batteries. The original 5 Ah battery is always on other tools.

Advantages: Ideal for home. Lightweight, comfortable, unpretentious Saws easily and smoothly, there is an illumination of the sawing area. There are no wires, which is very convenient in contrast to the network. Fits comfortably in the hand. Convenient file replacement. Separate speed control. High-quality product, solid assembly, good ergonomics. It is a pleasure for them to saw. Works smoothly, vibration does not spoil the cut - it cuts confidently

Disadvantages: No chip blowing.

Comment: Suitable for home use. The tool should be taken if you plan to buy additionally something else from the ONE + series.

Advantages: I worked as a jigsaw for 3 years both on heavy cuts and on delicate work. showed from the good side .comfortable grip. good illumination of the cut. enough power for any job

Disadvantages: when cutting when accuracy up to mm is needed, it clogs marks with chips. can not see . after 2 years the clip is broken, the file goes to the side (but it's hard to call it a disadvantage).

Comment: 80-90 window sills were cut on one 4.0 battery, which is about 5 hours of work

Advantages: Lightweight cheap, cuts great

Disadvantages: bulky

Comment: I worked for them for a year, saws a weave like oil, brushes were recently covered, repaired for 700r, again works like new

Advantages: Autonomy, price. Ergonomics on top. Power.

Disadvantages: All the shortcomings have already been described by other commentators.

Comment: Bought for work at height, roof fenders and for ceiling work. It is also irreplaceable on the road. Actually, what else do I need a cordless tool for, I have no idea. If there is 220!