ASUS PRIME B360M-K

Advantages: High quality in terms of soldering, component placement. A kind of minimalism for a reasonable price.

Disadvantages: Problem with installing old OSes. In addition to the falling off Klava and the mouse when installing the wine assembly7, the supplied disk also does not support installation on an old Windu. As a result, I put 10k. It worked perfectly, though I identified the vidyuhu by the chipset, and not by the actual model.

Comment: Great budget solution. There are some nuances, but microsoft of course anneals, stupidly blocks support for old OSes at the stage of iron production. Lobby around)))

Adequate price and quality Asus.

Advantages: price quality. there is everything you need for a budget assembly at maximum speed.

Disadvantages: Strange behavior at the beginning of operation. no DisplayPort. like know your niche slave))

Comment: Collected as follows: percent. i5 9400F. cooling ID-Cooling is-251 (57 degrees peak), Disk M2 - asx8200pnp -512GT-C. (sooo fast))) Memory CT 16G4DFD8266 (2x16gb), powered everything from PS-TRS-0650NPCWEU-2 (650w) since there is no video in the processor, I removed the video card from the nearest computer GTX 1660 super stormix. worked for a month without any complaints, in the future it is IMPORTANT !!! So, as the strange behavior of the system was observed at the first start-ups, Everything started at once, but !!! First .. memory for cars was not defined as 2666 but 50% less. Fortunately, it was possible to set it manually. Second ... the system did not start right away, but issued one long and three short beeps, then rebooted and started. during breaks after switching off, the picture was repeated, I would have sinned on the video card, but .. read above. BIOS update GORGEOUS !!! in three clicks with the mouse immediately from the BIOS !!! quickly and easily, but did not solve the problem, but the memory for the car became 2666, after installing the Windows. 10 bldg. the last time it squeaked 1 long 3 short ones and 4 days passed the flight of norms. and did not understand what was the matter !! On the hardware ... I don't dabble in overclocking, I play games at maximum speed, KSGO under 150FPS in 2K is also recording in parallel, but in the most voracious, shadows should be placed in the middle.In Kamtasia 2019, 2K videos are edited with 100% CPU usage. and the GPU is idle. annoying. Iiii ... the capacitors on the left of the CPU. On the hike, they rested on the tubes of the cooler, deployed the cooler like norms, although it is possible that I initially put it in the wrong way! PS .. bought in topcomp. there is a strange yellow sticker on the box, (the last photo!) Maybe mom after repair! stir up something!