be quiet! SHADOW ROCK LP (BK002)
Short review
Selected in the rating
9
Best rating
coolers for cpu
For AMD - For Intel - Low Profile - Variable Speed
Buy be quiet! SHADOW ROCK LP (BK002)
Be quiet! Features SHADOW ROCK LP (BK002)
Yandex.Market data
| General characteristics | |
| Appointment | for processor |
| Maximum power dissipation (TDP), W | 130 |
| Socket | AM2, AM3, AM3 +, AM2 +, LGA 1151, FM2, LGA 1150, FM1, LGA 1155, LGA 1156, LGA 1356, FM2 +, LGA 1151-v2, LGA 1366, LGA 775, LGA 2011-3 (Square ILM), LGA 2011 (Square ILM), LGA 1200 |
| Number of heat pipes | 4 |
| Radiator material | aluminum + copper |
| Number of fans | 1 |
| Fan dimensions (LxWxH) | 120x120x25 mm |
| Rotational speed | 100 rpm |
| Air flow | 87 CFM |
| Noise level | 14.8 - 25.5 dB |
| Bearing type | slip |
| Additionally | |
| Connector type | 4-pin Molex |
| Backlight | is absent |
| Speed regulator | is absent |
| Uptime | 80,000 h |
| Cooler dimensions (WxHxD) | 122x76x134 mm |
Reviews of be quiet! SHADOW ROCK LP (BK002)
Yandex.Market data
Advantages:
Low profile, cooling capacity, easy installation and maintenance.
Disadvantages:
Wish there were 15mm low profile fans
Comment:
Was put in a super compact assembly, Cools 8700K (scalped). To install it without dancing with tambourines, you need to slightly hook one side of the mounting plate with a screw and then firmly press the opposite side with a screwdriver and twist. Will hook immediately. Then just screw it all the way. I was lucky with the mounting wires, they can be bent in the opposite direction and fasten a 15mm fan. Total in CPU + FPU tests with a low-profile fan. The percent warmed up to 75 degrees. In general, like, because I found nothing so compact under 120mm and effective. I am attaching an example of its dimensions and RAM gap and how it fits into the case. My nickname is Yolenzo.
February 25, 2020, Moscow
Advantages:
+ Size + TDP + complete set + instructions are very clear + Ease of installation
Disadvantages:
Of the possible, these are possible difficulties with installing RAM or difficulties with high VRM heatsinks.
Comment:
I perfectly sat on the z390 Gigabyte pro WiFi, in memory of the kingstone hyperX Fury.
May 7, 2019, St. Petersburg
Advantages:
German quality, low noise level, stylish design.
Disadvantages:
The manufacturer's website states that the cooler can be deployed to cool VRM or RAM of your choice, and that the cooler is suitable for mini-ITX assemblies. This is all true, but if you have a mini-ITX board and you decide to turn the cooler towards the VRM, the heatsink elements will go beyond the board, and I think the board will not fit in most cases. I had to turn the cooler towards the RAM, although it already has heatsinks. I plan to replace the case in the future (for a different reason) and I hope I can turn the cooler towards the VRM.
Comment:
15 August 2018, Moscow
Advantages:
It fits perfectly on MSI MEG UNIFY x570 on Ryzen 5. Compact, effective TDP 130W versus standard 65W processor, they are remarkably consistent in terms of the adequacy of the heat sink. You can only hear the air in the fins of the radiator, and it is much less noticeable than the flow from case fans (also Be quiet!). Simultaneously supercharges 3 out of 4 memory modules (Hyper X Fury heatsinks are just fine, but taller ones (2-3 mm) can already create a problem in this radiator location. However, it can be rotated 180 degrees to avoid this, but the airflow will be focused on the space around the socket.Processor temperature at medium loads is 48-55C, at high loads - 65-75C. Works mainly on the PWM board settings at 800-900 rpm. Turns over 1350 (90%) are not set, the limit is 1450-1500. I did not see it below 45C in idle, but perhaps these are the features of the processor boost on my board
Disadvantages:
on AM4, you need to tighten the clamping bar very strongly, since this is the only way to achieve the absence of "floating" of the radiator on the thermal paste already applied by the manufacturer to its contact pad. The tightening torque is very high, since the steel backplate under the socket allows you to tighten the bolts all the way.
Comment:
It normally stands up on AM4 (although it requires an effort to press against the processor), but the socket is not listed in the specifications (product design year 2017). Almost all outlets indicate that it is equipped with a 4-pin MOLEX power connector, but in fact it is a 4-pin PWM. Apparently the set of supplies has been updated in recent years. In the photo, the standard fan has been replaced with an analogue in size - 12 cm, but from the top Be quiet! Silent wings 3, bolt-on mount, fits like a native on the brackets included in the kit. The reason for the replacement is the uniformity of the assembly design. There are no questions about the quality of the Pure Wings 2 pants. Its efficiency and silence are similar to that of a more expensive fan.
May 23, 2020, Moscow
Advantages:
Low (75mm) Quiet Cooling Good Good fan.
Disadvantages:
It is not so easy to install, but also not very difficult when you understand (AM4). On mini-itx, it fits only in one single position towards the memory.
Comment:
Top-end low-profile cooler. Ryzen 5 2600 without overclocking in Fortnite keeps a temperature of 51 degrees (room temperature 22-25). Better than him - only water, you can consider Raijintek Pallas. Compared with PC Cooler GI-46U (similar in appearance, but much cheaper) - Shadow Rock has a large dispersion area, since the radiator itself is slightly larger and the plates go a little more often. Installed on a mini-itx board (Asrock AB350) covers almost all connectors, but you can still connect to them. In a small case, installing the board and connecting the wires is difficult, but possible. For those who don't want water.
May 30, 2020, Anapa
